Old Bikes Have Soul: A ride out to Ross Hergott Vintage Cycle in Wellesley

This caught the eye of Alanna a few weeks ago and we rode out to Wellesley, Ontario to Ross Hergott Vintage Cycle today to have a look:

We’re both still in recovery from week one of year two of pandemic school, but we finally got ourselves into motion after noon and made our way through some fierce winds to Wellesley, which is one of those places that’s only 45 minutes away but I’ve never been too.

The goal was this all day vintage motorcycle ride-in and we saw old bikes on the road coming and going.  While we were there at least a dozen riders were hanging about, chatting and looking over what Ross had on display along with what they’d ridden over on.

Ross has a fanastic shop – the kind of place that looks like it has grown out of the ground with layers upon layers of collectables, tools and bikes that could only look like it does because he’s been there for decades.

We had a chat with a guy who rode a 125cc 1950 BSA Bantam over to the meet.  The tiny bike had been in his family for generations and he knew a lot about its history and restoration.  Old bikes like these tell a story simply because they are survivors.  Of the tens of thousands of BSA Bantams churned out in the 50s and 60s, only a handful remain, and to see one of them in fine fettle at this meet was a real treat.

My trouble-making pillion suggested the kid with the chopper pit bike take on the Bantam in a race.  It wouldn’t be much of a race (they didn’t exceed the speed limit at any time because they couldn’t), but it was fun to watch the kid stall out and the old BSA putter off down the road to victory:

MVI_4615

There were a couple of well looked after 70s Triumphs for sale at this meet.  Going for about five grand, they put the lie to that Tiger I’d been looking at online in a previous post.  I’m still hoping I can find a reasonably complete older British bike that I can rebuild from the inside out for a couple of grand and then bring it back to working order.

I’d thought that project would be a Triumph but after seeing some of the lovely BSAs at this meet (I’m a sucker for a polished alloy tank) I’m starting to think that perhaps one might be in my future.  I’m hoping for a simple, light-weight, air-cooled machine that lets me get analogue in a deeply mechanical way.  A twin would be ok but a thumper would be even more on point, and BSA made wonderful thumpers…

That blue BSA back there scratches an itch!

 

I’d feared it would be a Harley Davidson snooze fest but there was an interesting mix of old British bikes and HDs on hand – no Indians though, which was a shame.  Harleys always make me think of mennonites (Wellesley is in the middle of mennonite country so they were on my mind).  At one point Harleys were state of the art machines but they suddenly decided to stop evolving and just push out variations on the same theme for decades.  The motor company’s recent bikes show a rejuvinated interest in modernizing their designs.  From Charlie and Ewan’s latest Long Way Up on electic HDs to their latest Pan American adventure bike and newest Sportsers, HD is flexing some engineering muscle and suddenly considering them doesn’t seem as absurd to me.  I hope this new forward-thinking approach pays off for them.  I want to be a fan.

We had lunch at the Nith River Chop House (great food, but don’t be in a rush, they won’t be) and then rode over to a Eco Cafe on the Connestogo River in St. Jacobs for a nice coffee on the patio overlooking the river.  There we ran into an old fella named Albert who must be closing in on 100 years old.  He’s dealing with terminal bone cancer but told us some amazing stories about the decades he spent farming in South Western Ontario while the world evolved around him while we all enjoyed our coffee and watched the river flow past.

I don’t often head into farm-world to the west of us (lots of bugs due to the livestock and tedious, straight roads), but this ride out to Wellesley had me looking at the landscape in a new way, and knowing there’s an interesting classic/custom shop out that way means I’ll be keeping it in mind for future rides.  If nothing else, the chance to ride on roads I haven’t been round and round on during this year of pandemic lockdown felt like a breath of fresh air.  The chance to see old bikes was the cherry on top.

 

 

 

HD have always had an eye for style – this modern art inspired badge is lovely, then they stuck it on with a couple of philips screws, which casts a light on the other side of Harley ownership.

 

I get the urge to customize but at some point throwing away a bike’s ability to handle for looks ceases to make sense to me, though you’ve got to appreciate the effort, I just don’t share it.  I like a bike that prefers corners to straight lines.

 

 

A 1971 Triumph TR6 650.  This fifty year old survivor was also in excellent shape, and only five grand!

 

 

 

 

 

If you love chrome, HD have you covered.

 

I can’t say Nortons have ever lit my fire, though I can appreciate the brand’s historical significance.  Having said that, this 750 Commando is a lovely thing!  Look at those pipes!

 

 

1970 Triumph Daytona, Seven-Thousand, five hundred of your finest Canadian Dollars!  Restored in 2014, it’s been sitting in someone’s recroom ever since!  A close-up look revealed a lovingly looked after old machine.

 

Birmingham Small Arms Bantam – and one of the smalled, simplest carburetors you’ll ever lay eyes on!

 

 

 

If any of these get your motor humming and your wallet out, get in touch with Ross, he might be able to help you out:  Ross Hergott Vintage Cycle.

from Blogger https://ift.tt/3C2szTR

Winter Project Wishes in Absurdist Ontario

Trawling online advertising for a next level winter project and I’ve come across an interesting option, but then I remembered where I am. 

1968 Triumph Tiger 

An old Tiger built the year before I was born?  You have my attention.

This is a brown Tiger with a hundred sixty plus K on it?  They say it runs and it’s stock but it needs work – that might be the understatement of the year.

Either that 163,908kms isn’t accurate or this thing has been run into the ground.  If that’s the case, it’s not stopping them for asking four and a half grand, FOUR AND A HALF GRAND (!!!) for it.

Canadian prices for bikes, even old ones that look like piles of shit, never cease to amaze me.

Just for giggles I set FB Marketplace to the UK and had a look at what’s on offer back home.  Here’s a lovely, well restored and ready to ride 1961 Triumph Tiger with less than 2000 miles on it for £2100 ($3645).  Luckily I live in Ontario where a steaming pile of pooh will cost me a thousand bucks more before I then have to pour that much into it again to make it work.  I live in an absurd place.

The other nice thing about the UK is that they tend to honour their history and keep things going.  Canada has a much more use-it-and-chuck-it-in-the-bin approach.  There are some lovely pre-war bikes kicking around on UK’s bike marketplace.  If my novel took off and I was minted, a pre-war Triumph Tiger like the one my hero rides in the book would be on my wishlist.

Here’s just such a thing!  A 1938 Triumph Tiger 80.  It’s meticulously looked after and I’d greatly enjoy being the steward of this piece of history before passing it on to someone else who would keep it rolling into the future.

It ain’t cheap (dream machines never are).  They’re asking £12,000 ($20,828) for it, but it’d only go up in value, unlike a new Honda Civic (they cost about the same).  It’s been on sale for a month.  Bet I could get a bit off.  It wouldn’t be a daily rider, but on the days I did ride it, oh baby!  The project would be keeping it going and learning the maintenance and repair on it.

In Ontario this bike doesn’t exist.  If it did exist, some berk would want half a million dollars for it.

from Blogger https://ift.tt/3E3Dajo
via IFTTT

A Ride To Watch a Blue Horizon

 

270km round trip up to Georgian Bay to meditate on the big water.

Flesherton to Highland Grounds for a locally owned (and one of the best) Americano you can get in South Western Ontario.

Beaver Valley has some beautiful views and winding roads.

Graham Hill is worth going off pavement for, as long as the bike’s up to it.

After a winding ride down Beaver Valley to Thornbury Harbour I found the Bay growling in the wind.  It was 10 degrees cooler on the water.

After a sit by the water I headed back into the inland heat and tackled the Grey Bruce Highlands around Glen Huron.

After a rehydration stop on the Noisy River near Creemore I tracked back through the flat, straight, tedious farming desert back home to Elora.

270kms in intense heat – the 18 year old Tiger was flawless.

from Blogger https://ift.tt/3sW7E1u
via IFTTT

Kawasaki Concours14/GTR1400 Kawasaki Foot Peg Ergonomics

Taking bend out of the bike: the
changes pegs and bar risers
have made so far.
The Concours 14 is an excellent long distance weapon, but it’s built for someone much smaller than me.  When you’re tackling motorcycle ergonomics you can’t just slide a seat back, you’ve got to physically change parts, and the Concours parts aren’t fit for my intentions with it.  I sold a Honda Fireblade to get this bike and it wasn’t a like for like replacement.  If I’d wanted (or been able to use) a full on sports bike I’d have kept the ‘Blade, so I’m not trying to pretend the Kawasaki is anything like the Honda.  The side of the C14 I’m interested in is the long distance/two up riding bit.
With that in mind this otherwise stock, low mileage 2010 Kawasaki Concours felt like it was trying too hard to be a sports bike when it simply isn’t one.  The Honda only gave up 15 horsepower to the Kwak but was over 100kgs lighter!  After one 2+ hour ride the steering, while quite touring in appearance with long bars sweeping back from the headstock, are way too far forward and low for what I want to use the bike for.  At 6’3″ and 250lbs I’m also clearly not the average rider Kawasaki was aiming at with the rider ergonomics.  To solve the lean I put in Murph’s Kits bar risers which bring the grips 3/4 of an inch back and 1-3/8 inch up toward the rider.  This resulted in a 3% less lean and they installed very neatly, looking stock.

I could live with the pegs but my knees were feeling it on longer rides and my big feet meant I was sitting pigeon toed while trying to keep my feet off the rear brake and shifter.  What sold me on Murph’s Kits rider pegs was the promise of no more awkward, pigeon toed foot positioning thanks to the angle in them.  They were straightforward and quick to install (10 mins?) and reduced knee angle a couple of degrees while also allowing me to rest my big wamps on the pegs instead of having to hold my feet off them awkwardly.  A nice bonus is if I hook my boot heels on the new pegs they drop into the windflow under the bike and feel great in vented boots on a hot day; no regrets with that choice either.

But none of this has helped my passenger feel comfortable on the bike, which was a major reason I pitched the Fireblade for a sports tourer.  WIth the panniers on the Connie leaves no room for passengers with big western feet.  The passenger pegs are also set very high, so high you’d have to be seriously into yoga to look comfortable on them.

Unfortunately, Murph ran out of gas after the rider pegs and doesn’t offer any passenger peg alternatives.  A bit of lurking on message boards uncovered VicRay Custom Performance who machine a set of passenger pegs for the Concours 14.  Vic sends these kits out himself and it took a few weeks longer than Murph’s deliveries (don’t sweat Canadian deliveries if you’re dealing with Murph, he’s got them down!).  Vic’s passenger pegs finally arrived this week and I installed them this afternoon.
The instructions were hand written but the installation was well explained and straightforward.  The quality of the machining is excellent and the extension of the pegs means we should have no more passenger ergonomic headaches while riding with panniers.  The rubber isolation and width of the alternate passenger peg also promises greater comfort.  We’ve been busy with work (contrary to popular belief, teachers work in the summer), but I’m optimistic about this choice too.  The new passenger pegs fold up neatly and suit the look of the bike.  If you didn’t know they weren’t stock you’d just assume they are.
The last piece of the puzzle is the seat.  The C14 seat is narrow and gets to be quite miserable on longer rides with an awful lot of pressure on your, um, parts.  Alanna described it as, ‘hard on the vagina.”, so it’s uncomfortable for both rider and passenger.
The last time a poor OEM seat made me sad a Corbin saddle solved the puzzle.  I’d have gone for a used one but they retain their value and the used ones I could find were within a hundred bucks of getting my own custom designed seat.
Pre-pandemic my Tiger seat showed up in a surprisingly quick four weeks.  I’m five weeks into having ordered this time but I fear COVIDtime will strike again and the saddle won’t show up for some weeks yet.
The pegs relax the legs and the bar risers ease the crouch.  Big Blue is more comfortable than it has ever been and is starting to show the promise of the touring/sports/muscle bike I was aiming for.  Once that Corbin lands it’ll be ready to ironbutt on.

from Blogger https://ift.tt/3DcyO9c
via IFTTT

An Ode to Sturgill Simpson’s Sound & Fury

 

Just watched Sturgill Simpson’s Sound & Fury anime on Netflix again the other day – it really is something else.  If you’re into anime, or smart music, or avenging motorcycle riding samurai with robot ghosts in machines (along with a wild mashup of other experimental anime storylines and styles), you’ll dig this.

I’d done some digital art around samurai on motorbikes previously so I mashed up some of the samurai details from Sound & Fury with it and threw it together with the blog logo:

Disco!

from Blogger https://ift.tt/3iGQKQT
via IFTTT

Thrifty Motorcycle Gear

Think it’s too hi-vis for riding
in the rain?  Really?  You
want hi-vis in the rain… and
the hundred bucks you save!

I got into alternative motorcycle gear when I came across a $400 rain suit that didn’t do as good a job as the rain gear they sold at a fraction of the cost at our local farm store.  If you have access to an industrial clothing outlet used by tradespeople, you’ve got an angle on quality gear at a fraction of the cost of name brand, ‘moto-specific’ clobber.

For the people who have to work all day in rain, you know the stuff they use will be tough and properly waterproofed, and it is!  Instead of dropping hundreds on ‘moto’ rain pants I was happier with the $40 construction rain pants from the farm shop.

A construction rain jacket with a removable hood comes with fully seam sealed and very waterproof specs, even in the wind of riding it does the trick and compared to a $200+ moto-rain jacket, it’s a fraction of the cost (<$50).  Both the Forcefield pants and jacket have lasted for years and are still super-waterproof.  The bib on the pants also stops water ingress at the waist while riding in the wind and does a good job of keeping me dry even in torrential rain.

I still depend on moto-specific gear for certain things, like boots which have ergonomic design features specific to riding or jackets and trousers that are properly armoured for riding, but there are a lot of thrifty and effective alternatives for the peripherals if you’re not a brand model who wants to look like they fell out of a dealership catalogue.

Today I saw a pair of mechanic ‘impact pro’ gloves that are armoured leather, impact and abrasion resistant and look tough as nails.  For someone who rides bikes he’s proud of fettling and maintaining himself, the branding is spoton too.  I’d be curious to see how these compare in moto-specific durability tests (not that any magazines that play consumer reports for moto-gear do any of that kind of crash testing).

These gloves promise to be flexible, well ventilated and tough, and they look disco too.  A pair of moto-specific leather mits will set you back $80-100 or more and probably wouldn’t protect your hands as well.  Next time I’m in Canadian Tire I’ll give this a look.
If you’re a celebrity/brand hound then these suggestions won’t do much for you, but if you’re more interested in putting your money towards riding rather than looking like a catalogue model, this’ll help you not get skunked by overpriced moto-branded gear.  Motorbiking doesn’t have to be as expensive as moto-gear manufacturers suggest.

from Blogger https://ift.tt/3sd5M41
via IFTTT

Off-Roading Dreaming

My son, Max, got handy with dirt bikes at SMART Adventures last week and now I’m dreaming of some options that would let us explore trails together on two wheels.  If I had half a million dollars sitting around we could get ourselves into a winterized house/cottage on Lake Benoir on the south edge of Algonquin Park.  The only reason I’m even thinking about that is because of COVID.  In any other situation I’d rather travel than own more property but well over a year into this pandemic it doesn’t look like travel as normal will return any time soon.  That’d be a couple of acres in the woods in a small, simple house (electricity but mainly heated by wood burning stove) that comes with a good sized workshop.  They have some nice resorts on the lake so this isn’t as rough of some of Northern Ontario and it’s right in the heart of the Canadian Shield.  Off-road trails abound in the area as well as some of the best riding roads in Ontario.  We’d immediately get ourselves Ontario Federation of Trail Rider memberships and then get into the woods!
Back in the real world where half a million bucks and doubling down on real estate isn’t in the cards, getting off-road could happen in a number of different ways.  Here’s the most to least expensive in order:

NEW STATE OF THE ART OFF ROAD KIT

Jeep Gladiator Overland:  $65,000

A capable off-roader that can get us to the trail head while carrying the bikes.  It’d make a great base from which to ride from and then would be able to get us out of the bush at the end of a long day of riding.  There are a lot of camping options that let you leverage the vehicle to make camping a bit less mucky including truck bed mounted tent systems and proper bedding.

2021 CRF250F:  $5649 x2

I took one of these out for the day at SMART Adventures and really got along with it.  I’d buy an Ontario used dirt bike but the prices are absurd.  Broken 20 year old bikes are asking ridiculous money!  New dirt bikes aren’t madly expensive and this one, being a Honda, would last as long as I’d ever need it to.  I’d get two of the same thing to make maintenance more straightforward and then my son and I could ride together.

Total (the camping gear is another grand):  $77k

LIGHTLY USED OFF-ROAD KIT

2015 Used Jeep Wrangler:  $36,000

It’s got 90k on it, a 5 speed stick and a V6.  It looks in good shape and comes with the towing cubbins I’d need to tow bikes to where we could use them.  The Wrangler has a pile of camping related gear for it that isn’t crazy expensive.  The tent off the back is three hundred bucks and the rear air mattress less than a hundred.  The whole shebang would come in under $37,000 and would be good to go pretty much anywhere while still doing Jeepy things like taking roofs and doors off.

Used Dirt Bike:  ridiculous prices

Here’s a random selection of used dirt bikes online in Ontario in 2021.  People are asking nearly four grand for sticker festooned, brutalized and rebuilt bikes covered in replacement cheap plastics because the OEM ones were smashed off.  Four grand for these POSes!  I don’t know that there is a cost effective alternative to dirt biking, at least in price crazy Ontario.

Here’s another example of the insanity complete with questionable literacy skills:  1998 ktm exc 250 2 stroke, Needs a crank seal, witch (sic) I have. ( don’t half to split the case) it’s a 40 min Job if that, it does run but I wouldn’t without doing that seal first as it pulls tranny oil in other than that it needs the front breaks bled and a few small things like bolts for a couple plastics and such, I have the ownership, full gasket kit for the motor, all the paper work on the bike. $2,500OBO  That’d be a sticker festooned, broken and abused 23 year old (!!!) KTM for two and a half grand!  I just can’t make sense of Ontario’s used dirt bike market.  By the time you’ve sorted one of these wrecks out you’d have dropped over five grand on it anyway, which would get you a new bike.

But then there are some Chinese manufacturer option:

SSR SR300S dirt bike:  $5000 x 2

Here’s a 31 horsepower, 300cc, 286lb well specified off-roader that undercuts the Japanese equivalents by almost a grand.  Of course, the ‘Japanese’ bikes aren’t made in Japan either so everyone is spending a lot extra on brand and dealership accessibility.  I’d have headaches finding parts for beaten up old Japanese brands anyway, so worries about parts don’t really matter.  For a couple of grand less than two new Hondas we could still have new bikes, just without the branding.
Here’s another:

Vipermax 250cc Apollo:  $2899 x 2

Based on Honda tech, these 250cc bikes have disc brakes and other modern tech and weigh in under 300lbs as well.  They’re not quite as big and powerful as the SSR above but they’re capable, new and feature a lot of recently updated tech.  The two of them together would cost almost what one CRF250F ($5800 for two vs $5650 for one CRF250F).  They’re probably built in the same factory.  Isn’t globalism fun?
If I could find a couple of used but serviceable 250cc trail bikes for a couple of grand each I’d happily take that on as a winter project, but they simply don’t exist in Ontario and with the Chinese options, why buy terrible, expensive and used?
***
A Jeep would open up camping and off-roading options beyond what the bikes could do and it’s something I’d like to get into in any case.  There are dirt bike hitch trailers for the Wrangler and it could tow a trailer too.
There are a lot of ways to get off-road and out into the wilderness, I just have to figure out the one that works for us.

from Blogger https://ift.tt/3ft0JHu
via IFTTT

Long Distance Rallying: Lobo Loco’s Comical Rally

We were up early on Friday morning getting ready for the Lobo Loco Comical Rally. This was a tricky one with super-hero themed locations but without a set start and finish location. It sold out well before the start day and had people from all over the place participating in it.  A long distance rally like this gives you a list of theme based locations you have to research and plan to visit in a set time period.  This one also had a minimum distance requirement of 400kms in 12 hours.

For us we were looking at a warm (28°C), sunny day in Southern Ontario. Our plan was to create a ‘skeleton’ map of where we wanted to go and then research locations on the route that would get us points. Because this rally was a human-focused one, it made sense to head into population to find locations, so I elected to make a route that would lead us to Niagara Falls eventually. This would mean riding in the dreaded “Golden Horseshoe” – the most populated area in Canada and usually a sure way for me to lose all hope in humanity.

I usually aim away from population when I ride. Sitting in traffic and dicing with distracted drivers isn’t on my to-do list when I go for a ride, but one of the advantages to doing a rally is that it pushes you outside of your comfort zone. In this case it would help me hone my highway riding and traffic management skills.

The plan was to take the new Concours 14 on the trip but after a pre-rally ride on it we got home and looked at the Corbin seat on the Tiger and decided to take the older, less dependable and less long-distance touring ready bike simply for a saddle that doesn’t feel like a sadist’s dream.  The Tiger also has nicer foot pegs for pillion and wasn’t giving me any reason to doubt it so I spend the day before making sure everything was tight and ready to go.

By 10am we were on the road getting points.  We looped through downtown Elora to catch our first super-hero bonus (IRONMN1) and then bounced over to Fergus to get our first villain bonus at the Lutheran church there (LUTHOR1), then it was down to Guelph to catch a Spiderman themed stop (a science building at a university) before heading on to our first comic book store stop at The Dragon in the south end of the city.  We’d hoped to also do a motorcycle themed comic book cover in the store but thanks to COVID they were running on reduced hours and weren’t open yet.

We’d done a lot of research and planning for the rally but you’ve got to be ready to pivot while you’re in a timed rally in order not to burn time.  Unfortunately, at that moment the Tiger decided to get temperamental and wouldn’t start.  I finally got it going again so we decided to grab a MOVIEP bonus for a superhero themed movie poster at a theatre nearby instead (you could only pick up 3 stops in teach location).
The Tiger wouldn’t start again after stopping at the theatre (turning over but not catching when hot).  I was now anxious and worried that we’d get stranded while far from home during a never-ending pandemic.  It finally started and we pulled over at a local Starbucks to have a coffee and a think.  The bike was working perfectly other than the hot-start issue so we decided to press on.  Because we parked the bike for 15 minutes while we had the coffee, the Tiger fired up no problem – so it starts, just not immediately after you turn it off.  This is a problem in a long distance rally where you’re starting and stopping up to 25 times, but a manageable one.

South down Highway 6 we immediately got stuck in traffic coming off the 401 mega-highway.  It was starting to get properly hot now but once we got moving the temperature was bearable.  We were going to stop at Flamborough Patio Furniture to get a photo of one of their giant chickens (the INHULK bonus was to get a photo of an oversized road-side attraction), but there was no place to safely stop and I’m very conscious of safety when we’re rallying, so we pressed on to Terra Greenhouses where we got the GOBLIN1 bonus for finding garden gnomes.  We stopped long enough that the Tiger fired up no problem – 10 minutes seemed to do the trick, so on we pressed to Hamilton and our next three targets.

Another science building stop at McMaster University almost got us the REALHOx real hero bonus (get a  real-life hero to sit on or stand by your bike) when a nurse came out of the hospital still in scrubs on her way home, but we couldn’t find her once we pulled into the university parking area.  After McMaster we headed downtown looking for a Wonder Woman bonus (stature of a woman), but construction meant we would have been sitting in traffic for 20 minutes trying to get there so we bailed, hit the Levity Comedy Club for a JOKERx bonus before riding out along Hamilton’s rough dock area.

The next target was Do Eat Sushi in Grimsby where they serve octopus on the menu (the OCTOPI Doc Octopus villain bonus!).  We stopped for an excellent lunch at Station 1 across the street before pushing on to St. Catharines.  Our Skills Ontario GIS medal winning son was at home so we had him look up an alternative Wonder Woman statue we could do and he found a great one!  St. Catharines was the end of the Underground Railroad that helped slaves escape the land of the free south of us.  Harriet Tubman was a real-life wonder woman who helped free hundreds of slaves and then went back to the US to fight for the Union in the civil war.  Her statue in St. Catharines, where she lived for a time, was in a meditation garden on the side of a small church in a rough area of the city, and it was lovely and all the better for it because we were originally going to just grab a statue of a queen instead.  Canada has a lot of hidden history like this but queen statues are a dime a dozen.

From Harriet we worked our way through St. Cats getting a Peter street and a Parker Street along with another science building to complete the Spiderman combo bonus (Peter & Parker streets, GOBLIN, OCTOPI and science building – so all the Spiderman – points).
We headed out toward Niagara toward Queenston Heights for our second wonder woman statue (Laura Secord this time) but the canal was closed while a massive ship with what looked like huge steel building construction on it closed the way over.  Some cars were turning left so we followed them down the canal to the next bridge and got over as the big ship was entering the lock upstream.  It was cool to see but slowed us down.  I missed a turn to get on the highway and we ended up travelling through Niagara wine country instead, which was an improvement.
As long as we didn’t stop the Tiger and expect it to start right away it was flawless, though the clutch was starting to make some odd noises.  Maybe it’s time to change the sparkplugs.  We collapsed in a heap on the grass in the Queenston Heights across from Laura’s statue at 5pm.  At that point we’d done about 160kms and hit 14 locations.  Our initial plan was to do 24 locations (one under the 25 limit) and continue on to Niagara Falls before looping back and catching our final stops in Cambridge and Kitchener on our way home, but my phone was acting up and the bike was causing worry and I was concerned about our stamina (over the past 3 years our family has faced cancer and heart surgery).

As we sat there with our boots and socks off (I took my pants off too), we had a picnic of apples, granola bars and water, cooling off and stretching, we made a decision to call it.  With better circumstances, a less questionable bike and better stamina on our part I think we could have aimed for a 10k score, but for this one my main goal was to finish and do it with a smile on our faces.

Finishing meant we had to do a minimum of 10 stops and cover at least 400kms.  The distance requirement was going to be tricky and we wouldn’t meet it by retracing our steps.  Just before my phone died I mapped an alternative route that would have us dodge west on the 403 to the 401 before heading home on the highway.  Going this longer way around on the highway would mean we wouldn’t be on the road so long (but it would be at speed in rush hour traffic) and we’d just get over the distance requirements.
We set out about 5:30pm and bombed down the QEW without any slowdowns.  When we got to the bypass around Hamilton things ground to start-stop with compression waves of impatient people cutting each other off and making it worse.  We sat amidst the rows of idling SUVs, minivans and trucks, all spewing carbon into the atmosphere while everyone made a point of slowing things down in hopes of getting themselves a few feet further down the road.  In circumstances like this it’s hard not to see every GTA rush hour as a metaphor for why we’re willing to make the world uninhabitable just to get ourselves a bit further down the road.  It takes a special kind of blindness to not see that when you’re sitting in it every day.
The jackass in an Audi wagon with fifteen grands worth of carbon road bicycle on his back bumper who ran right to the end of a lane before cutting in front of the row of traffic was in the majority.  Nothing makes people worse than there being too many people, and there are more too many people in the world every day.
I’d suggest lane splitting for bikes but after watching Ontario drivers fail to indicate and drive irrationally just in order to get ahead one space in traffic, I don’t think Ontario can handle lane splitting or filtering of motorcycles, we don’t have the culture or the driving skill to do it safely.
Once clear of the idiocy that is Canadian city driving (there’s a reason the only accidents Ewan & Charlie had when they rode around the world was in a Canadian city), we made tracks on the 403 away from the apocalyptic Golden Horseshoe.  The Tiger doesn’t have much in the way of wind protection (it’s basically a tall, naked bike), but the motor is a treat and we bombed down the 403 to Woodstock where we stopped to fill up at about 7pm.  The Tiger was managing over 50mpg two up with luggage.  The long ride into the setting sun had dried us out so we grabbed a Booster Juice and stretched before hopping back onto that lovely Corbin saddle for the final run home.
The 401 is a lot like Mad Max but without the speed limits.  As we got out onto the near-empty mega-highway we merged with 18 wheelers already doing 120km/hr and made tracks for Kitchener.  We got there in what felt like a matter of minutes and ducked off at Shantz Hill to take Regional Road 17 past the Waterloo Regional Airport and home.
The sun was low in the sky and the sunset was beautiful.  We passed through several small, Germanic communities around Kitchener and I figured at least one of them would have a Lutheran church so we could pick up another LUTHOR bonus, but all the little village churches had switched to United Church and I didn’t have it in me to go hunting this late in the day.

We pulled into the same Esso station in Elora that we’d left at 9:40am at 8:30pm and 407kms later.  If you factor in our three extended stops, we were in motion for 9 out of those ll hours averaging 45km/hr including 14 stops for points.
If you’ve never done a long distance rally like this you’ll find that you’re exhausted at this point.  Riding a bike is much more physically taxing than driving a car, especially an air conditioned one on a hot day.  We’d made a point of hydrating whenever possible but you always end up in a deficit doing an event like this.
This was our first timed rally as a team and we both have a much clearer idea of what’s needed to be more competitive next time.  An ergonomically sorted Concours would be a better tool for this kind of long distance work, especially covering the highway miles, and it would erase bike mechanical worries.  Stopping for hydration and to sort ourselves out is a good idea – being frantic and chaotic on something like this doesn’t help you maximize points.  We got penalties for misspelling not putting addresses in some of our emails, though our photos were good so we’ve got that down.
I had to get the Send Reduced App on my generic OnePlus Android phone in order to meet the size requirements for attachments which adds extra work to sending in stops.  Iphones and Samsung Android phones do these file reductions automatically in their email programs so that’s one place to trim wasted time and maximize scores.
It took us 9 hours in motion to make 14 stops.  You don’t want to rush stops because you can lose points making mistakes, but you also don’t want to end up with stop lag.  An efficient stop would probably be a couple of minutes if you’re finding a safe place to stop, parking up the bike, getting the rally flag ready and taking the photo and sending it correctly.  Some of our stops lagged up to 10 minutes.  If we’re running for maximum points we’d need to tighten up our stops, but retaining the breaks is a good idea to maintain hydration and limberness.
The biggest place to pick up points would be in building our stamina so we could run competitively for the full 12 hours.  This would require physical training.  There is also an element of circumstance/luck in a long distance rally.  If you get stuck in traffic or COVID reduced business hours you end up missing points that might otherwise fallen to hand.  I’ve always felt that if you practice your luck it will improve; experience makes luck happen.

Our rally prep is strong and our ability to pivot away from bad situations while in motion was good.  If we can improve our tools and stamina we could aim for a 10k+ finish points wise which would put us mid-pack.

The Concours is a better bike for this kind of work compared to the 80 thousand+kms, older and cantankerous Tiger, but I haven’t ergonomically tailored it to our needs yet.  A phone that streamlines submissions would help as would an on-bike navigation system rather than me trying to do all that through my generic and increasingly disappointing OnePlus Android phone.
TomTom makes a moto-specific GPS system (so does Garmin) that would allow me to create a full rally route rather than the limited number of entries Google Maps allows.  G-maps is also (like all Google apps it seems) a poorly designed afterthought designed to collect user data rather than provide an optimal service – we pay for free in many different ways.  Having a navigationally specific tool would make for much more streamlined directional plan.
Our goal was to finish the rally and we achieved that.  By building on our strengths and consolidating this experience and improving our tools and processes, we’ll be able to aim for a more competitive result next time.
Here’s our rally planning spreadsheet: 
If you’ve never tried a long distance rally, give it a go.  It’s a great way to hone your bike craft while riding with purpose.  You also end up finding things you might not otherwise known about, which is one of my favourite things about it.
Below are the final scores.  We finished, but just.  Check out the mileage on the top runners!  Managing over 1100kms in 12 hours means you’re averaging over 90kms/hr for 12 straight hours.  I can’t quite wrap my head around how that’s possible if you’re still stopping for points all the time.  Even if you’re pulling up, taking a photo, sending it and then immediately going again, you’d have to be really moving to manage that.  Even our perfect run wouldn’t have gotten us in the top 20.  The skill and stamina shown by the top runners is incredible.

from Blogger https://ift.tt/3kSrskq
via IFTTT

Eye Of The Storm

We pulled into Creemore just past noon with rain forming on my visor.  My lovely wife (who is very
good at finding a seat in a restaurant) got us just that on a covered patio at the Old Mill House Pub and we enjoyed our first meal out since the pandemic started while watching the rain fall.

The thunder cell past over just as we finished lunch so we had a nice walk around Creemore checking out the Creemore Bakery & Cafe coffee shop and the local, independent bookstore, Curiosity House Books.  Of course, we stayed just along enough that the next cell was moving in, and it was a humdinger!  We could have sat it out but the afternoon was getting long and we had a doctor’s appointment to get to back home, so we got ourselves ready and jumped on the bike just as the rain came again.

This wasn’t a summer shower like the last one, it was torrential.  By the time we turned on to County Road 9 to follow the Mad River up the Niagara Escarpment and hopefully through the storm, the road was a river itself and visibility was down to just a few car lengths.
This was my first time tackling this kind of weather on the Concours and I was doing it two up and on a schedule.  I don’t know if Kawasaki Heavy Industries makes nuclear submarines (they do, of course), but the Concours handled this biblical end of time storm like one.  With the windshield raised I was able to duck out of the deluge in my face and track through the tsunami.
County Road 9 twists and turns as it follows the Mad River up the side of the escarpment and the volume of rain was already causing flash flooding.  As we approached Duntroon a construction site on the left side of the road had washed out leaving half a foot of muddy water running across the road.  I angled the bike to hit it at 90° and we crossed effortlessly leaving a wake of muddy water.  Further up the river had burst its banks and had flooded the dirt roads leading over it.
Stopping seemed more dangerous than the alternatives so I just pressed on.  As we climbed out of the valley the rain, which had been thumping down in quarter sized drops so heavy I thought they might be hail eased and stopped as quickly as it came.  As we crested the summit the sun broke out, highlighting the green valley behind us that was still under a diabolical sky.  We pulled up to the intersection with Grey Road 124 which would lead us down toward Horning’s Mills, Shelbourne and then home, except the sky south of us wasn’t just dark and sinister, it was green, like a fresh bruise.
“I don’t think I want to ride into that,” I said to Alanna.
“Noooo…” Alanna said, eying the apocalypse south of us.
“How about we jog west to Dundalk instead?” I said, nodding to the turnoff just south of us.

The sun was out and the road was steaming as we sat there watching Shelbourne getting rocked by a storm cell that would go on to Barrie and wreak havoc half an hour later.  

A deke onto County Road 9 and we were passing through county side washed clean by the passing storms.  We caught another followup cell past Dundalk but it was nothing compared to the submersion we’d experienced coming out of Creemore.

It was one of those moments when you bond with a new bike.  You ride it well and it performs like the fantastic piece of engineering that it is.  As we thundered home (making the appointment with 10 whole minutes to spare), I found myself appreciating the Neptune Blue Kawasaki in a new light.  This bike offers a level of versatility, even in the most obtuse situations, that opens up riding opportunities that I might otherwise not have considered.

On Friday we’re taking a run at Lobo Loco’s Comical Long Distance Rally.  We’ve got the right bike for the job.

Some Kawasaki Concours fan-art…

from Blogger https://ift.tt/2Urhz2h
via IFTTT

Ergo-cycling: Concours 14 vs Tiger 955i for 6’3″ Me

 Cycle-Ergo, the motorcycle ergonomics simulator, is a great online resource for getting a sense of what you’ll look like and how you’ll fit on a bike.  Unlike cars, your options with bikes aren’t as easy as sliding your seat back or adjusting the steering wheel.  To make ergonomic changes on a motorbike you need to change hardware and make physical changes to make it fit.

The other day I was out on my trusty 2003 Triumph Tiger 955i.  I came off a Kawasaki Concours 10 to the Tiger and while the Connie was comfortable, it made my knees ache on long rides.  The first time I sat on the Tiger it felt like a bike built by people the same shape and size as me because it is.  I can go for hours without putting a foot down without a cramp on the Triumph.  This got me thinking about the differences between the big Kawasaki that sits next to the Tiger in the garage these days.

Cycle-Ergo gives me a quick way to check out the differences.  Forward lean is much more pronounced on the Concours 14 (12° vs an almost vertical 4° on the Tiger).  Knee angle is the same and my knees aren’t bothering me on the Connie but hip angle is 6° tighter on the Kawasaki which explains the cramps I was feeling after today.

I sold a Honda Fireblade to bring the 1400GTR in and that bike had an extreme ‘sports’ riding position which was basically like doing a push-up on the bike (you lay on it) – it ain’t easy on the wrists.  There are advantages to this aggressive riding position.  When you want to get down to business in corners a forward lean gives you a more intimate relationship with the front end, which is why sports focused bikes tend to sit a rider the way they do.  If I lived somewhere where roads were dancing with the landscape instead of cutting straight lines across it I’d have happily kept the Fireblade but in tedious Southwestern Ontario it didn’t make much sense.

Today I did a 200km loop on the Kawasaki and the constant lean does make it tiresome on the arrow straight roads around here (I have to ride 40 minutes to find 10 minutes of curves).  In the twisties the Concours is much more composed that the tall, skinnier (and ADV) tired and leany Tiger.  The Concours is a 50+ kg heavier bike but you can see in the animation that it holds its weight much lower than the Tiger.  In the bends today the Connie was fine but the Ontario-tedium I have to deal with most of the time has me thinking about ways to ease that lean.

There are solutions to this in the form of ‘bar risers’ which are blocks of machined metal that you slip in under the handlebars to bring them taller and closer to you so you’re not stooped.  For me the lean also means I’m putting a lot of weight on my, um, man-parts, which end up pressed up against the tank in the lean.

I had a look around at bar-risers.  There are number of people who put them together including some cheaper Chinese options but I ended up going with Murph’s Kits C14 bar risers.  Murph is well known in the Concours Owners Group and has been producing Concours specific parts for decades.  His risers aren’t quite as tall as some of the others and look to solve the problem without over-solving it by giving too-tall handlebars that spoil the lines and the purpose of the bike.

The biggest ergo-thing I did on the Tiger was getting a Corbin seat for it which makes it a long distance weapon.  I’ll eventually do the same thing for the Connie but I think I can make do with the stock seat this year and then do the Corbin over the winter.  That doesn’t stop me from mucking around with the Corbin seat simulator though:

By next spring I’ll have a C14 that fits, but it isn’t as easy as sliding the seat back in a car.  In the meantime we’ve got the Lobo Loco Comical Rally coming up at the end of the month.  That requires a minimum of 400kms travelled in 12 hours and will need more than that if we’re going to be competitive.  I’m hoping my bar risers will be installed and I’ll bring the good ole Airhawk out of semi-retirement to keep me limber over a long day in the saddle.

from Blogger https://ift.tt/3r6hXiK
via IFTTT