Category: Tim’s Motorcycle Diaries

I’m enjoying the new format of Motorcyclist magazine.  It’s one of the few US bike magazines I make a point of getting.  They write smart and with a Californian perspective that is very positive and engaging.  Their new graphics format is like nothing else out there.  They also take risks with their stories.  In many other magazines you feel like you’re reading the same reviews and comparisons over and over again.  Motorcyclist is like Bike UK and what Cycle Canada used to be in that you know you’re reading something unique.  I think that has a lot to do with them focusing on getting the best writers rather than the most industry connected people they can find.

In the last issue they had a bit on towing a dirt bike into the desert using another motorcycle.  It was a bit silly, kind of like a bridge to no where, but I could appreciate it from a more bikes is good perspective.  Having said that, I have to question the logic of trying to go car-less this way.  Towing a trailer means you’ve lost all the benefits of splitting lanes (try to imagine you’re somewhere sensible like California) and, you know, riding a motorcycle.  They said at the end of the article that chucking the dirt bikes in the back of a truck instead of trailering them and towing them with two touring bikes would have been easier, but I think there is an even better way to make that all motorcycle ride into the desert.

Things you don’t see anywhere else. It’s a story of excess, exhaustion and a lot of motorcycles.

The KTM 690 Enduro weighs only a couple of dozen kilos more than the 250 dirt bikes used in the story.  You get great wind on it while on the highway, unlike the hot and sweaty touring bikes used, and best of all the KTM costs about $27,000 Canadian less than a CRF-250X and a Goldwing.  I bet it would take you across the sand and up the mountain they went to in the article as well.

It’ll take your camping gear and you don’t need to slavishly fulfill two motorcycle style requirements, so you can leave your ever so fashionable heavy leather touring gear behind.

If the point of the exercise is to get out there and back on two wheels, something like the KTM would have done the business, though it might have been a bit less dramatic doing it.  The highways would have been full of wind blast and the nimbleness of two wheels rather than two towing two more.  The off road riding would have been mighty close to what the 250 dirt bikes could do, and you’d be doing it all cheaper and more enjoyably.


Having said all that, what a great thing it is to see an article so uniquely silly and full of excess.  I’m glad the editor let it happen.

The Swiss Army Knife KTM 690 Enduro.
http://ift.tt/2rJA4i0
http://ift.tt/2qqk8gB
http://ift.tt/2rJKdez
… and the new ones are in! http://ift.tt/2qq5oP5  If I had fifteen grand free I’d pop up to Ottawa and ride one back.

from Blogger http://ift.tt/2rskRSC
via IFTTT

Setting up a 360 camera on your wing mirror using a gorilla pod and setting it to automatically take a photo every few seconds seems like the best way to catch some interesting self portraits while you ride.  It’s a set up and forget system so you can just enjoy the ride.

Afterwards you download what the camera caught and then frame the photos as you wish (the 360 picture lets you move the point of view around until you’ve framed something interesting).

I’ve been trying to replicate the tiny planet view that the Ricoh Theta could do in its software on the Samsung Gear360.  GoPro makes a little planet capable app that they give away for free, so I’ve been using that.  Here is an example of a time lapse video tiny-planeted in the GoPro software:

The photos are screen grabs of time lapse scenes on the Samsung 360gear. They’ve all been worked over in Photoshop to give them a more abstract look.  I’ve included the original photo to show variations:

Here’s the original photo.

Here is a posterized, simplified version.

Here it is with an oil paint filter and a lot of post processing.

Here is a tiny-world ‘wrapped’ image taken with the 360 degree camera.  Below are some variations on it…

 Below are some other 360 grabs – they’ll give you an idea of how you can select certain angles and moments and then crop a photo out of them pretty easily.

One of the few things the Samsung does well is make time lapse video fairly straightforward (I miss my Ricoh Theta).  The software Samsung bundles with the gear360 only works with Samsung phones (which I don’t have).  The desktop software won’t render 4k video at all (it ends up so blocked and pixelated from artifacts as to be almost useless).  And when you’re first importing video it takes ages for the software to open a video for the first time.  By comparison the Ricoh renders video almost instantly, has never had artifact problems when it renders and has never crashed on me (the Samsung software has crashed multiple times). If you’re patient and are ok with crappy results, go for the Samsung.  Meanwhile, here’s what I could get out of the damned thing:

This is a 360 fly video sped up, the weekend after the April ice storm:

Software used:  Adobe Photoshop CC, Adobe Lightroom CC, Paper Artist, Windows movie maker, Go-Pro VR Viewing software

from Blogger https://ift.tt/2jeSRfi
via IFTTT

It hasn’t been easy, but then that was kind of the point.  The leaking engine on the field-found ’94 Kawasaki Concours seemed like it would never stop dripping, but it finally has.  I’ve learned a lot in the process and become familiar with the layout of the bike.

The previous owner rode around with the fairing off.  The abuse to the bottom end of the engine from road debris cost me an oil cooler.  I tried to get it repaired through the metal shop at our school, but it turned out not to be an easy fix.  I eventually gave ebay a try purchasing a replacement oil cooler through Pinwall Cycle Parts.  I’d highly recommend them.  The cooler I got off a ’97 was in fantastic shape, got to me very quickly and cost 1/8th what a new one does.

With the bottom end sorted out it’s time to look to the fairings.  The bike has been dropped on one side, and the fairings need some TLC.  With the fairings sorted the bike should be ready to go come the end of the snows.

That’s a new-to-me oil cooler that works like a charm

The rest of the bottom end has been cleaned up… no drips now.

January 13th, 2019.  High of -21°C, low of -29.  I’m months away from riding with months to go until I do again.  This is as close as I can get to the saddle, some motorcycle digital art…

from Blogger http://bit.ly/2Hb0CSm
via IFTTT

Now that the CBR900RR Fireblade project is sorted and on the road, I’m finding myself doing what the original intent was in getting it:  learning from a different type of motorcycle.  Unlike the heavy industry Kawasaki Concours, or the SUV of motorcycling Triumph Tiger, the ‘Blade was built to a different design brief. The other bikes were over engineered heavy to last, but the the Honda is a feather.


That philosophy is at odds with the heavy handed git who owned it before me and managed to maintain it into such a state of disrepair that it kept it off the road for years.

From the rear brake cylinder that was assembled backwards and over tightened, to the over tight wheels and the slipping clutch I’ve just adjusted to actually be at spec rather than over-tightened, I’m finding the Honda was a victim of a heavy hand and unsympathetic mechanical inclination.


When I was a teen my dad was talking me through a head gasket repair on one of my first cars.  We weren’t minted, so the only way I was driving was if I could keep an old car on the road; mechanical training was an implicit part of vehicle ownership for me growing up.  As we were tightening the head back on he made a point of talking me through the bolt pattern – always tightening opposite bolts so it would seat evenly, and then said something that I’ve never forgotten as we started tightening down the head:  “always one tight, not too tight.”  I guess the guy who abused this lovely piece of Honda engineering into years in a garage never got such good advice.


Mechanical sympathy is an important part of maintaining any machine, but especially a motorcycle, where if you are cack-handed you can end up seriously hurting yourself when it breaks.  In that way, motorcycle mechanics are a lot like aircraft mechanics, it’s a do it right or it can go very wrong kind of situation.


Part of that sympathy is taking the time to understand what the engineers who designed the machine want you to do in terms of looking after it.  In the case of the CBR900RR, Honda would like you to leave 10-20mm of play at the end of the clutch lever – this one was set so you could strum it like a guitar string.  This play is to ensure that the clutch fully disengages when you let go of it.  An over tightened clutch cable means it’s always set to be slightly pulling and engaging the clutch.  Making it too tight isn’t just a failure of the hands, it’s a failure in thinking that wounds the machine.  In this case, the over-tightened clutch cable explains why the ‘Blade was slipping RPMs when I opened it up.  A sympathetically tuned motorbike will give you a purity of interaction that allows you to more fully understand the machine.  This is one of the reasons why I value technical fluency so much, it puts your ability to operate technology into focus in a way that the technically ignorant will never realize.


***


Meanwhile, in the land of Tim where he’s trying to keep a 17 year old European and a 23 year old Japanese bike rolling during the perilously short Canadian riding season, the Tiger’s stalling when hot continues.  I’ve ordered a replacement air idle control valve from Inglis Cycles, who have once again exceeded expectations during a pandemic by sourcing the part from Triumph in the UK and getting it to me in about a week.


One of the nice things about the Tiger is that it’s fuel injected, so all that carburetor management is taken care of, but the evil end of computerized fuel injection is that after seventy six thousand kilometres it’s finally gone wrong, and an electronic system like that can go wrong in a lot of different ways. 

I’d never gotten into the Tuneboy Software that came with the Tiger (the original owner installed it along with a Power Commander), because if it ain’t broke, don’t fix it.  But now that it’s broke, I got going on it the other evening.  Getting into the bike via a computer was pretty cool.  The software is Y2K retro-hip and the connection was straightforward.  The 20+ pages of instructions weren’t really needed (I’m handy with computers).  Windows 10 automatically recognizes what you’re plugging in (back in the day, WinXP would have needed drivers installed), and the software is responsive and quick to connect.  It occasionally drops connection, but unplugging it and plugging it in again resolved that each time.



The compact disk (told ya, Y2K hip!) had all of the stock maps for my year of Triumph Tiger 955i engine on it, so I saved what was on there in case it was some kind of cool specialty map the previous owner had worked out (dude worked at a nuclear power plant, so don’t underestimate his tech skillz), and then I flashed it with the stock numbers, which took about 20 seconds and returned a confirmed result.  There is a slight lag, but otherwise this is easy to use stuff.

I then played with the diagnostics tool for a bit, hoping for some data that will help me isolate the hot idle stalling fault.  The software says there are no errors (promising that this is that mechanical failure then), and the only thing that looks out of place is a strange return on the engine temperature.  It seems to read accurately and then show -40, even when the fan is coming on, but if the fan is coming on and the temperature gauge on the dash is reading normally, I suspect this is something to do with how the software syncs with the on board computer rather than an actual fault, but I’m going to keep it in mind.


The problem with an idle fault on a fuel injected bike is that the engine management system is taking in data from a number of sensors and using it to balance engine activity, like idling, based on that information.  I’ve got the mechanical component that regulates idle on the bike incoming, and I hope that resolves the issue, but what I fear is that it’s something else, and with these complex electronics systems could mean that anything from a dozen different sensors or relays to a loose or broken wire.  With any luck, it’s that idle air control valve and I’m back on the Tiger… and the Honda, just not at the same time.

from Blogger https://ift.tt/2Y0mZjG
via IFTTT

There was a time when every motorcyclist was also an amateur mechanic.  Getting your hands dirty was the only way to keep early motorcycles running.  We’re over a century into the evolution of the motorized bike now and, as in all places, digitization has taken over.  Modern mechanics are now called technicians and have to be as adept at communicating with the computers on a modern motorcycle as the old school types were at diagnosing a mechanical fault with their senses.  Both are complicated, but in quite different ways.  There are obvious advantages to modern bikes in terms of efficiency, ease of use and dependability, but motorcycling is inherently a compromise in convenience, and many of the iconoclasts who escape the clutches of automotive transport to ride in the wind question the replacement of human skill with automated assistance.

Back in the day the motorcyclist themselves performed many of the tasks that a modern day technician does, so what was left to the old school mechanic?  What you’d typically find in a pre-war motorcycle repair shop looked more akin to a machinist’s bench than the antiseptic, electronically focused diagnostics bay of a modern day garage.  That ability to manufacturer your own parts and diagnose problems without computer support, using only your senses and your hands might seem simplistic and archaic, but it was nothing of the sort.  There is a secret art to working with pre-electronic, analogue motorcycles that trips up many modern technicians who, while adept in leveraging digital tools to diagnose digital machines and replace parts, struggle to diagnose and repair mechanical faults.


***

If you’re into restoring older machinery, this vanishing skill set is hard to come by, but I’m fortunate to live near one of these rare, independent, locally owned shops.  Lloyd Gadd is the owner and operator of Mostly Ironheads in Elora, Ontario.  With decades of experience in mechanics, he approaches motorcycle repair old school.  His shop is part machinists, part mechanics and part historical ode to The Motor Company.  Lloyd focuses on older Harley Davidsons, but as the name of the shop implies, it’s not an exclusive focus.  Lloyd is also a qualified mechanic who can do everything from MoT safeties to changing a tire.

I was in there most recently getting last winter’s Fireblade project safetied, and in the process Lloyd’s prompt service got me looking at a better way to do motorcycle tires that will save me a significant amount of money.  While I was over there I also did a round of photography to give you a sense of what goes on in this old school shop.

Multiple engine rebuilds of air cooled Harley twins were ongoing in this small but dense workspace.

Unlike like most modern shops that simply refuse to work on long term mechanical or machinist driven repairs in favour of high turnover/quick to repair parts replacement, Mostly Ironheads will actually machine parts and rebuild a motor from the ground up.

It’s a whole other level of mechanical commitment when you are prepared to turn your own parts out.

Lloyd has a number of customer projects on the go, and also makes a point of collecting older and vintage parts.  If you’re fan of Harley Davidson you should make a point of riding up to Elora and checking out what’s on hand – in many cases you’ll see parts that are so rare that you may never have seen them before, even if you’re into classic hogs.

Lloyd told me the story of a 1950s Harley racing motor he’d come across.  Only one of the two heads is accurate, but he’s on the lookout for a replacement – though seven decades old serviceable racing parts don’t survive well, as you can imagine.  When he has this rare piece of motorcycling history back together it’ll be one of the few remaining complete Panhead racing motors in existence.  You might think that’s a one off, but not in this shop.  Even if you’re not into HD, this place is an ode to moto-mechanical history and worth a stop.  Air cooled bikes have an aeronautical aesthetic to them that modern bikes often miss.

The machining needed to sort this head out is impressive.  It had worn down below spec so is now being built back up and reground to specifications.  When you can machine your own parts, you’re as much an engineer as you are a mechanic.

 Being a restorer, Lloyd is always on the lookout for parts, and the shop is an ongoing work in progress, with parts coming in and getting sorted and stored until needed.  Previous customers, online and estate sales and various other connections like the Harley Owners Group mean Mostly Ironheads are able to draw in older parts, often found in boxes of ‘stuff’ that get dropped off.

Lloyd mentioned a customer who dropped off a box of stuff while clearing out space at home.  In the process of going through it they discovered an unopened complete carburetor assembly still in the original factory packaging from the mid-sixties!  There is a joy in bringing a piece of history like this back to life, and the joy is alive and well at Mostly Ironheads.  If you’re in Southern Ontario, it’s an easy ride up north of Guelph to the shop.

This is that racing motor – one of the heads is incorrect, but the rest is intact and very rare!

 These are the cam lobes for that racing head compared to a typical one.  Not only is the racing cam lobe lighter with hollowed shaft, but it’s also heavier duty in terms of strength.  Here and here are good primers on cam profiles if you’re curious.  Whereas the right side regular cam is designed for long term use and efficiency, the more radical racing came on the left is designed to stay open longer, rev high and produce more power, though it wouldn’t idle well, get good mileage or run smoothly.  But when you’re aiming for all out speed, you’ll put up with that just so you can wind it up and go.  You’re unlikely to see mechanical history like this anywhere else in Ontario.

In addition to the restoration work going on, you’ll also find an eclectic mix of older, finished air cooled Harleys ranging from customized choppers to more standard rides.  If you’re into older, air cooled machinery, this will really float your boat.


Lloyd’s area of interest extends from post war bikes all the way up to the last of the air cooled, carburettor fed bikes.  If you’re into graphic design, you’ll see everything from post war art deco to sixties and seventies disco and eighties futurism in the logos and bike designs.


There are some core elements to Harleys (like v-twin engines), that evolve slowly, but design wise they’re much more in tune with their times than you might have assumed.

from Blogger https://ift.tt/3d4XQbQ
via IFTTT

I just came across some dream project bikes.  There are a pile of ’80s Honda Interceptors online this week, and an interesting little VT500.


Low mileage but not in working condition, just what I need to break down and rebuild!

Asking only $400, but it’s a hike out the other side of Toronto.

For $700 there is a higher mileage but better cared for Interceptor just up in Angus that comes with all the shop manuals.

Or I can drop $700 on bits and pieces in Kitchener and put an Interceptor back together again, because dude took it apart and now has a garage full of unspecified parts.  Brilliant.  Seven hundred bucks might be a bit much to clean out his garage, though it’s close by and it’d be easy to go pick up.  Might be a good choice further down the road, but not for a first project bike.

Another possibility is the Honda VT500.  This air cooled beauty is in great shape and would be a fantastic starting point for a cafe racer build.  It’s been well taken care of and I could probably ride it home from out Brockville way.

Lots of possibilities on Kijiji this month…

The other week I was out for a short ride up and down the river on a swelteringly hot day.  On my way back home I was accelerating out of the small hamlet of Inverhaugh when I noticed a bike down on the side of the road and the rider standing there looking at it.


I immediately checked my six (empty road) and indicated to pull over.  I stopped about 50 feet up the road from the downed rider and walked back.

Rider down, would you stop?  The four guys in front of me on Harleys didn’t – though the nice couple in the Ford did…

  
The rider turned out to be Natalie, a 20-something on her first bike, a Ninja 300.  She couldn’t lift the bike, which had fallen when she stopped to check directions, so I helped her get it back on its feet.  All was good except a bent shift leaver which was pushed in to the point where it was interfering with the frame – we couldn’t get the bike in gear which means she couldn’t ride home.


If I’m going any distance I have a tool kit on the bike, but this being a short ride, I wasn’t so equipped.  Natalie had been out all day in the sweltering heat and had elected to head home rather than stop with the group she was with for a late lunch.  Exhaustion (no doubt some of it heat related) and a moment of broken concentration conspired against her and the bike tipped over.


A car with a couple in it has stopped so I asked if they had a tire iron I could use to gently bend the shift lever out.  I didn’t want to yank on it too hard for fear of damaging the seals.  There was fresh oil around the lever, so I was worried that it had already been damaged in the fall.  The couple didn’t have a tire iron – but I suspect it was more a case of they didn’t know what that was or where to find it.  With no one else stopping in spite of frequent traffic and our options limited, Natalie called one of the riders she’d been with who was only 10 minutes away, back in Elora at a restaurant.

A few minutes later, under the sweltering sun, a Suzuki Hayabusa showed up with a “fuck fear” sticker on the windshield.  The hard man riding it hopped off and went about yanking on the gear lever until it was clear enough to move freely – he seemed determined to resolve things quickly.  I told Natalie and her friend that if they needed any assistance I was only 10 minutes away in Elora and they would be welcome to come by if they needed tools, and then I left.


As I pulled away all I could hear were stereotypes ringing in my ears.  I’d initially seen a sports bike down and a rider in sporting gear on the side of the road and had to fight an involuntary prejudice that they’d been assing around and tossed themselves at the countryside.  That, of course, wasn’t what had happened at all – it was a case of a fairly new rider doing too many miles in tough conditions and underestimating how physically demanding that can be.  We all do that to start off with – I told Natalie how I’d dropped my first bike several times while trying to do too many things at once.


Then there was the moment as I approached when I thought, hmm, that’s a mighty small fellow, before I realized I was approaching a female rider who was looking frustrated and overwhelmed.  My wife later asked if I was worried about stopping and making her uncomfortable.  That hadn’t occurred to me at all, but perhaps it should have.  Considering the circumstances, I think safety trumps any worries about chivalry or chauvinism.


When the ‘fuck fear’ ‘Busa showed up with rider to match, I was again fighting that sense of stereotyping, but he had cut out on everyone else and a much needed late lunch to get out there and help his friend.  All the tattoos and attitude couldn’t hide that sense of kindness.


Then there were the ten or so cruisers that puttered by without stopping or even slowing down to see if everyone was alright.  These are the hard core types in leather who go on and on about how nice bikers actually are and how they always stop to help a fellow rider.  Perhaps these brotherly and sisterly biker types were all late for some kind of pirate fancy dress party; there was another stereotype broken – or perhaps they only help their own subculture.


Any time I see a rider on the side of the road I slow and give them a tentative thumbs up, which they have so far always returned.  If they didn’t, I’d stop to see if I could help.  This doesn’t have anything to do with a magical bikers code of conduct or chest thumping self-righteousness.  If someone on a motorcycle (any motorcycle, it doesn’t have to be made in Milwaukee) is stuck on the side of the road, they can’t sit in a safety cage and they’re at the mercy of the elements.  Leaving them out there because you’re too selfish or lazy to stop is both dangerous and cowardly; riding by like you didn’t see it makes you a giant tool, even if you do like to strut around telling everyone what a paragon of virtue you are.


I’ve no regrets about stopping.  I’ll keep doing it because it’s what everyone should do.

from Blogger https://ift.tt/2S1hVXQ
via IFTTT

I’ve looked into the savage world of motorcycle tires before.  Way back in 2016 I got fixated on customizing the rims and putting new rubber on the Kawasaki Concours, and got introduced to the expensive nature of buying half as many tires that wear out way faster.  That first time left me with a $500 bill for getting 2 Michelin Commander sport touring tires installed and left me wary of the expense.

More frustratingly, I ended up using the Counteract balance beads anyway because the caveman weights used on a traditional balance machine still left the wheels with a wobble, so that $500 bill ended up being even higher, though it did make me feel way better about using those beads – they work better than weights and a technician half paying attention to the balancing machine.


In 2017 the Tiger’s tires were getting tired, so I was once again at Two Wheel trying to get in for service (they suggested a one month wait was likely that time – local car tire places really need to look into this market).  At that time they were pricing Michelin Anakees at about $420 for both, with another $100 for installation which was only the tires because if I wanted service within a week instead of a month I had to remove the tires and bring them in myself.  With taxes and incidental costs that crept in on the bill, those two tires ended up costing me almost seven hundred bucks, and I had to take the damned rims off and put them on myself!


Fast forward to 2020 and supply chains are in tatters (not that they were that good a couple of years ago).  After trying to contact Two Wheel and getting no response to multiple attempts, I started looking elsewhere.  No local tire companies do motorcycles – you’re missing a market there everyone.  Motorcycle tires wear out quickly, get replaced often and cost more!  The only motorcycle focused company that could be bothered to raise a response was Revco, who were responsive and delivered the tires quickly and efficiently, even beating expectations I’d have had pre-pandemic.  If you need motorcycle tires in Canada, Revco can and do deliver!


Where am I at with costs this time around in the expensive world of motorcycle tires during a pandemic?  Counteract Balance Beads were just under thirty bucks, the two tires were $126 & $155, so the whole bill came out to $310.  I’m at $360 including taxes and delivery.  Lloyd installed them for $100, so now I’m at $460 for this round of motorcycle rubber.  That’s 35% cheaper than my last pre-pandemic tire buying experience.

Just out of curiosity I looked up the same Michelin Anakee tires I put on the Tiger three years ago that ended up costing me $500 just for the rubber.  They’re starting to square off and have a fair number of kilometres on them, so an over-winter tire change is likely this year.  On Revco three years later they’re $382 delivered with taxes, or 24% less expensive.  Even Lloyd’s newly updated shop costs for installation at Mostly Ironheads are less than dealer costs in 2017, and are done in 48 hours.  I’d be at $482 ready to roll when it cost me $700 before.


I know where I’m going and how I’m getting tires fitted from now on – and I’m even supporting my small, locally owned shop in the process.  The only thing preferable would be my own tire installation machine, but I can barely fit in the garage as it is, so that’d only come after a house move.  With the deficit in service around here, maybe I should just be doing motorcycle tires out of my garage anyway.

from Blogger https://ift.tt/2znCyZo
via IFTTT