Tag: motorcycle

I’m all about the bike, but if you’re going to take a car, a freakin’ 427 Cobra would be the one!

The mile eater!  I sometimes forget I’m on a Concours and find myself dropping a knee !

I’ve done a few LED light upgrades on motorcycles to date, so updating the indicators on my trusty 2003 Triumph Tiger 955i isn’t producing many surprises.  Unlike the Kawasaki Heavy Industries ZG1K project bike last time, the Triumph doesn’t use standard automotive blinker relays, so the cheap and cheerful option I went with last time from Amazon doesn’t have the same pinouts.  Fortunately, the blinker relay is easy to get to on the Tiger (pic right).

The stock, German made Hella blinkgeber 4db 003 750-36 indicator relay swaps the positive and negative terminals from the Japanese standard ones, so it isn’t a plug and play swap for a cheap, Chinese relay from Amazon.

Like most relays built for standard bulbs, it speeds up when it senses a lack of resistance (ie: a blown bulb) so you know when you’ve got a bulb out because it ticks fast.  LEDs are so much more efficient than standard bulbs that they act like a blown bulb, so you end up with hyper-flashing where your indicators are blinking silly fast.

While looking around for a plug and play alternative that wouldn’t have me making a rat’s nest out of a neat wiring loom, I came across superbrightLEDs.com and their primer on hyperflashing…

Looking through their site, I found an indicator relay that would be a straight swap on my Euro-awkward bike.  The price is pretty much the same as the Chinese part on Amazon, but then you get stung with shipping that is more than the cost of the part (Amazon shipping was covered).  They promise that this will work with LEDs, which I’m a bit cautious about because the other ones I’ve purchased have a potentiometer (dial control) on them that lets you adjust to the speed you want, and this one doesn’t.

It’s suggested in places that you can swap the power and ground, but a number of people seem to have had problems with that on various bikes, so I bit the bullet and ended up with a $24USD bill where it would have been $12CAD (shipping included) on Amazon.  I’m hoping I’m getting a higher quality piece for all that extra outlay (the superbrightLED one has a 2 year warranty on it whereas the Amazon one didn’t).  The part is on its way, so I should be able to finish the indicator upgrade in early January.


The rest of the wiring has been pretty straightforward.  The LED set I purchased from AliExpress (my first time using them – shipping wasn’t quick but everything got here eventually and the prices are amazing), worked fine when the system was doing 4 way flashers, but went into hyperblinking when I indicated.  It’s an easy wiring in, but again the Euro-awkward nature of the bike means it didn’t have standard sized spade clips and I had to cut the old ones off and use replacements which were way harder to find than they should have been.

Your 21st Century Hardware store sells you things, just none of them are tools or, you know, hardware…

As an aside, have you noticed that hardware stores don’t carry hardware any more?  A trip to my local hardware shops was more like going to home decorating shops with lots of pretty things but no actual hardware.  I ended up at an automotive specialty retailer to find electrical connectors.  Hardware stores are now just glorified department stores.  You can’t survive as a hardware retailer in a world where no one fixes anything.


Anyway, onwards and upwards.  After the Tiger, the Honda CBR900RR Fireblade project is getting the same treatment, so I’m going to have to figure out what indicator relay Honda went with.  Hopefully it isn’t as Euro-awkward as the Triumph.  I’ve always wondered why they don’t include an LED friendly relay in the LED lighting kits for motorcycles, but with everyone using different variations on the indicator relay, you’d be selling people parts that might not fit their situation.

The middle block is the indicator relay on a 955i Triumph Tiger.  It’s easy to get to with only a black, plastic cover to remove.  With any luck, my expensive LED indicator relay will do the trick and plug right in there.

from Blogger https://ift.tt/2QDung8
via IFTTT

What I miss most about STAY AT HOME pandemics:  Getting lost on unfamiliar roads…

I’m lost in the Grey Highlands on my way to Coffin Ridge Winery for a COVID-shutdown social-distancing/prohibition vibe pickup of some of their Back From The Dead Red.

I lost my internal compass on the unfamiliar, winding roads of Walter’s Falls (though it could have been the meteorite buried under the town) and ended up in Bognor! It doesn’t just sound like it’s out of Lord of the Rings, it looks it too.  I guessed west when I should have turned east and found myself in the Bognor Marsh battling fetid, shambling swamp creatures like a later day knight aboard my trusty Tiger.

I eventually fought my way out to the shores of Georgian Bay, looking north across the never ending grey water to the end of the world (or its equivalent in French River).  Coffin Ridge Winery, perched on the north facing edge of the Niagara Escarpment, was pandemic deserted but for a lone fellow looking over the vines in the bitter, overcast April wind blowing in off the bay.

Ironically, adventure is hard to come by in a stay-home pandemic shut down, but this gave me a much needed shot of it.

Kiri at Coffin Ridge was a delight to communicate with on email and had our order sitting on the red chair ready to go (I was only 20 minutes late, battling Bognorian Shambling Mounds not withstanding).

If you’re riding in Southern Ontario and looking for a bit of adventure in your antiseptic COVID bubble, a ride into the Grey Highlands might just bring you back from the dead (red).  You can reach Kiri here.

A deserted Coffin Ridge Winery, just before the COVID zombie attack, but I can’t talk about that, the government is involved.

Thornbury Harbour closed – no standing on the rocks communing with Georgian Bay for me this time. The GB Kraken must be getting lonely, and hungry…

The bizarrely Victorian and completely deserted hydro generation building in Beaver Valley, where I had a lonely stretch before being beset by a pack of OHM-wolves infected by the now feral electricity leaking out of the abandoned generator and into the surrounding wilderness.  Jerry Bruckheimer couldn’t have done this spectacular battle justice, that beautiful brick building is now a smouldering ruin.  The Tiger and I barely escaped with our lives!

from Blogger https://ift.tt/2yNsmbO
via IFTTT

I came upon a group of riders after exiting the ferry and getting most of the way across Manitoulin; first off the ferry gives you wide open roads!

I’d been moving along at a nice clip alone but had to slow down to follow them.  Had they been a car or truck I’d have used my power to weight ratio to good advantage and made a quick, safe pass.  This clump of bikers were much longer than your typical truck, so passing them would be tricky.  In addition to the physics there was suddenly a lot of motorcycle psychology to consider.  Would these riders take offence at being passed?  I’m not safely ensconced in a box if they got aggressive.

In wondering about this I sparked a rather heated debate on COG.  The sensible (and rather Zen) solution seems to be to find a nice place to have a stop, a stretch and a drink, then get back on the road when they’re well down it.  In this case that would have meant a long, patient wait while the entire guts of the ferry that had been trundling along behind you ruminate down the road at their cow-like pace.  Strangely enough, the only thing that seems to be able to clip the wings of a motorcycle are a bunch of motorcycles in front of it.

I had a moment when I first started riding where I suddenly realized I’m on a machine that has Lamborghini like power to weight ratio.  Since then I’ve made a point of exploring what this means.  When you ride you’re missing the steel cage, but what you lack in mass you make up for in agility and power, and learning to harness that power is vital to your well being.   Following that logic I prefer to have things coming at me and don’t like being passed or boxed in, but for twenty frustrating minutes that’s exactly where I was as a line of campers and SUVs formed up behind me.

The general feeling on COG was to either pull over or take your chances passing a bunch of leather clad bikers not knowing if these are wannabes or one percenters.  The later are much more likely to do something about it if they perceive disrespect.  In any case, it’s not like you’re in a big box so antagonizing them seems like a potentially dangerous course of action from both a physics and a psychology point of view.

I was out on a ride with a group the other week for the first time, but these guys didn’t hang about and were making a point of using side roads rather than main through fairs so we weren’t holding anyone up, and there were only half a dozen of us.  We were also riding a wide variety of machines designed to exploit the natural agility of the motorbike from GSX-Rs to forty year old Kawasakis in genres from adventure to standard to sport and sport touring.  I’d also say we were pretty approachable based on the number of people who approached us.  Eclectic would be a good way to describe us, we certainly weren’t wearing anything approaching a uniform.

On COG someone suggested that when they ride in a group they intentionally get out of the way if they feel they are holding up traffic because everyone has the right to enjoy the road how they want to, but not everyone feels that way:

I’d say physics and some rather negative stereotypes (along with a lot of bikers adopting those stereotypes) held up that traffic.  I don’t think respect had anything to do with it.

So there you have it:  the best advice when you come upon a large group of floorboard grinders is to pull over and take a break, it’s not worth the hassle of trying to make a pass, even though you’re on the machine best able to do it.

Google motorcycle films and this is what you get, the odd intelligent attempt amidst the bikespoitation flicks.  And we wonder why the general public still has doubts about motorcycling…

 

It’s a sunny Sunday afternoon on May 25th and I’ve got an afternoon on the Ninja.  Rather than do a pointless local loop I aim at The Forks and head east.  It’s a nice ride on relatively interesting roads across Wellington County, Hillsburgh and Erin to Belfountain.  When I get there I realize that I’ve just walked into a mecca of bike culture in Southern Ontario.


The parking lot of the local ice cream and coffee shop is covered in motorcycles of all description, from Harleys to Ducatis and everything in between.  I hang a left and head onto seven of the best kilometres in Ontario.  On the ride down I’ve timed it perfectly, no one is in front of me and I lean the bike more than I ever have before.  Suddenly timely gear changes are vital to balancing the bike and the tires get some wear on the sides.  

I’ve been coming up to The Forks since I got my driver’s license in the 1980s, but this is the first time I’ve done it on two wheels (except for once in an Escort GT, but that wasn’t intentional).  On my way back I get stuck behind a guy in a Prius (a Prius?  Really?) and decide to pull over at the hairpin to get some media.  An OPP cruiser slows as he sees me on the side of the road but I give him a wave and when he realizes I’m taking pictures and not hurt he gives me a wave back and continues on his way.

Forks of the Credit, from Belfountain to Highway 10

That train of bikes in the opening video was actually ten bikes longer, I’d already put the phone away when they started and didn’t get it out and recording until halfway through the two wheeled parade.

Watching the cars lumber around the hairpin is a stark contrast to the bikes as they weave through the 180° hairpin.  At one point I thought one of the cars was going to have to back up to make it.

Back in Belfountain (where I got married sixteen years ago), I have a cup’o’tea and wander around looking at the bikes.  There is a constant stream of people coming and going, all ages, genders and interests.  The leather clad Harley guys are there, adventure types in their Aerostich, the sport bike crowd in their leathers, the touring riders on their Goldwings with pillions in tow, and even some cafe racers in their vintage gear.  It’s a cross section of Ontario motorbiking culture.

That’s me on the right.

After my wander I do The Forks once more, this time I’m clear both ways.  I pass back through Belfountain and a whole new flock of bikes have flown in.  My blood is pumping now and I get home fifteen minutes faster than I got here.

Pictures from The Forks of the Credit on May 25th, 2014.

The Fireblade project has come together nicely thanks to the strangeness we all find ourselves in with the COVID19 pandemic.  With a suddenly extended March Break, I was able to sort out the fairings, get the LED indicators wired up and finalize all the plumbing for fuel delivery.  It was all fiddly, last minute stuff, but with the time in hand it was easy to sort.  The adjustable indicator relay got wet when I cleaned up the bike which prevented the LEDs from flashing, so it got waterproofed and sealed.  The first ride was enlightening…

360° Video from RICOH THETA. – Spherical Image – RICOH THETA

from Blogger https://ift.tt/3aU3UUB
via IFTTT

Some home-made Versys diagrams of what a high/scrambler type exhaust might look like – it looks good!  I have to wonder why Kawasaki never did this with the bike…

A more all round capable Versys…

The asymmetrical nature of the rear shock (only visible from the right side of the bike) means that, aesthetically, a high pipe might look balanced running up the left/empty side.

The pipes and muffler are all usually mounted at the bottom – not ideal for off roading where soft exhaust components can get pounded flat.  Having them wrap around the left hand side of the bike and finish up under the rear frame means a protected exhaust.  I’ve always wanted to try custom exhaust building, this might be my chance.

Pipes and muffler out of the way mean more ground clearance even with a steel skid plate installed.

At five kilos lighter and with a four horsepower bump, the Akropovic tail pipe for the ER6 motor (what the Versys has a version of) would lower weight while offering a gain in power.  The titanium tail pipe would also look good while not taking up too much space under the rear fender.

Creating a custom metal heat shield around the pipe would protect from burns while also protecting the pipe.  Most scrambler style/high exhaust pipe use this as an excuse to decorate.  The ER6 parallel twin is a very efficient and cool running engine.  Even the exhausts don’t get nuclear hot.  With some careful routing and smart use of heat shields, this should be doable.

The new exhaust might upend the fueling, so this would be an ideal opportunity to try out a Power Commander and get into computerized fueling control for the first time.

The next step would be to find some scramblery tires.  A road focused tire with some off road capability would do the trick.  Fortunately, Pirelli’s MT-60 dual sport tire not only gives the Versys some real off road capability, but it also improves road handling over the stock tires.  They come in Versys stock sizes (120/70-R17 fronts and 160/60-R17 rears) and cost about five hundred bucks for the pair online.

At under four hundred pounds the Versys is already a light machine.  The goal would be to make changes that don’t add significantly to the weight.  This light weight, multi-purpose Versys makes for an interesting Swiss-Army knife of a bike.

You’d be hard pressed to find a more neutral riding position.

A 1 inch seat rise only makes it more relaxed and usable.

A taller rider online said that increasing his seat height made the bike an ideal long distance tool.  A number of places seem to offer that very modification.

The stock windshield is a bit weedy as well.  I got a Givi windshield for the Concours and think it a great piece of kit.  The Givi item for the Versys is slightly taller than stock (not a problem, I’ll look over it anyway), but looks good.

The only other thing I would add is a top box, allowing for carrying smaller items while keeping the bike as narrow as possible.  I installed a Givi topbox on the Ninja and it worked well without being too bulky.  It also allowed my pillion a place to rest against.

I’ve found well used (’07, 80+k kms) Versys for $2800, and much less used (’09, <10k) Versys for $4500 online.  If I can unload the KLX for $2500, my son’s little Yamaha for $600 and the XS1100 for $1000, that’ll give me about $4000 to put into a relatively new, dependable, fuel injected bike that I can then begin modifying!

The mods listed here are as follows:
Custom pipe         =  tbd – most of this would be diy
Akropovic exhaust   = ~$500
Power Commander     = ~$400
Pirelli MT-60 tires = ~$500
Custom seat rebuild = ~$700
Givi windshield     = ~$180
Givi topbox & hw    = ~$400
                      —–
                      $2680 + diy exhaust piping            
Twisted Throttle’s Versys ADV makes me want to add to this.

More Versatile Versys Links

http://www.motorcycle-usa.com/2011/12/article/2011-kawasaki-versys-project-part-2/

https://www.canadasmotorcycle.ca/pirelli-mt-60-rs-sport-corsa-rear-tire.html?gclid=Cj0KEQjwzq63BRCrtIuGjImRoIIBEiQAGLHdYWSmxI0JjOz5nLndRdEQqiUyqy2EV8vH2LIWmAgwsXkaAu8f8P8HAQ

http://www.motorbikesaddles.com/Kawasaki%20Versys%20Tall%20Seats.htm

http://www.kawasakiversys.com/forums/

http://www.pirelli.com/tyres/en-ww/motorcycle/all-tyres/sheet/mt-60-rs

http://www.giviluggage.co/givi-product-focus/bike-overview-kawasaki-er6-nf-05-08/

http://www.giviusa.com/my-motorcycle/kawasaki/versys-650-06-09/447fz-monorack-sidearms-detail

http://www.giviusa.com/givi-products/cases/monolock-cases/e340nta-34ltr-matte-black-case-detail

http://www.kijiji.ca/v-sport-touring/kitchener-waterloo/kawasaki-versys/1146380401?enableSearchNavigationFlag=true

http://www.twistedthrottle.ca/shop-by-bike/kawasaki/versys-650-07-09

http://www.twistedthrottle.ca/news-and-events/adventure-motorcycle-magazines-twisted-throttle-and-sw-motech-equipped-kawasaki-versys.html

I’ve been messing around with 360° immersive video at work.  One of the best ways to quickly get familiar with the technology is to use it in a difficult circumstance so you can find its limitations.  At work we’re building immersive video to show a virtual walk-through of our school.  If the gimbal and camera we have will work on a motorbike, it’ll work stuck to a kid’s head as they walk through the school.

There are a number of barriers to admission with 4k video and image stabilization.  Fortunately, the 360Fly4k windshield mount I have is so over engineered that it easily handles the weight and motion of the gimbal and camera rig.

I’ve previously done 4k video with the 360Fly4k, but it has a big blind spot on it, so this would be my first true 360 4k video.  The Fly is a tough thing that takes great footage, but I’d describe it more as a 300° camera than a true 360 one.

This 4k 360 camera is the Samsung Gear 360.  I’m running it off the camera because the app won’t run on my Android non-Samsung phone because I guess Samsung don’t want to sell many of these cameras – it’s kind of a jerk move on their part so if these things don’t sell (because you have to have a Samsung phone to access it remotely), then they’re getting what they deserve.

The Gear 360 has a small screen so you can see settings and using the buttons is fairly straightforward, though you’ll find yourself constantly accidentally pressing buttons while you’re handling it.  The Ricoh Theta 360 is still my ergonomic favourite in terms of control and handling, and they just came out with a 4k version of the Theta – perhaps they’ll lend me one to test.

The gimbal is a Moza Guru 360°Camera stabilizer.  The typical gimbal design has weights to the left or right of the camera to keep things balanced, but on a 360 camera that means you’re blocking all sorts of sight lines.  The Moza gimbal is vertically stacked with the weights hanging below, mostly out of sight.  It has a power button and a push button joystick that lets you set shooting modes and centre your camera so it’s looking where you’re going rather that looking down the ‘seams’ between the two cameras.

Most 360 cameras are actually two or more cameras working together.  The resulting footage is then stitched together in software to make an every direction video.  The raw footage from the Samsung looks like this (on left).  A front and back facing fish-eye camera capturing separate footage.

Because both cameras are capturing different scenes, you can often see where they are stitched together because of a difference in ISO which shows up as a clear line of brightness difference (on the right).  They all tend to be identical, fixed-lens cameras, so the aperture and shutter speed tend to be identical.

The first test video has the Samsung camera set at highest resolution (4096×2048 pixels in video) and 24FPS.  The gimbal is in locked mode, so it’s always looking in the same direction even if I go around the corner.  The gimbal provides smooth video by taking the bike’s motion out of the video (it’s always looking in the same direction as the bike and I rotate around the shot), but a bike’s motion is one of the best parts of riding, so for the second shot I set it in tracking mode so it followed the bike’s motions.



Uploading it to YouTube out of the Gear 360 Action Director resulted in a flattened video that doesn’t allow you to pan.  In order to produce that kind of video in the G360-AD (what a ridiculous name), you need to PRODUCE the video in the software and then share it to YouTube from within the program.  My issue with this is that when you bring the program in it takes an Intel i7 VR ready laptop the better part of twenty minutes (for less than ten minutes of footage) to process it before you can do anything with it.  When you produce it (again) for YouTube you end up waiting another twenty minutes.  The Ricoh Theta saves the video (albeit 1080p equivalent) in a fraction of the time and the resulting saved version is 360 ready for YouTube; the 360Fly software is likewise efficient at 4k.  I’m not sure why I have to wait forty minutes to produce less than ten minutes of footage on the Samsung.  I know it’s a lot of data to work through, but it isn’t a very streamlined process.

So, after a lot of post processing, the 4096×2048 360° video out of the camera shows up on YouTube at 1440s (s stands for spherical rather than p – pixels – spherical footage is stretched across a wider area and tends to look less sharp).  I’m not sure where my 2048s footage went – I imagine part of that big post processing was to shrink the footage to fit on YouTube more easily?

 If you click on the YouTube logo you can watch it in YouTube and adjust the resolution (bottom right) to see how it looks (make sure to do it full screen to use all your pixels).  If you’re lucky enough to be watching it on a 4k display, this will come close to filling it.


The quality is excellent, the microphone remarkably good (they get beaten up pretty badly on motorcycles), but the awkwardness of post processing and the ergonomics of the thing don’t make it my first choice.  Trying to manage it with gloves on would be even more frustrating.  What you’ve got here is a good piece of hardware let down by some weak product design and software.


The software does offer some interesting post processing options in terms of wacky arts filters, but if you’re shooting at 4k all this does is drastically reduce the quality of your video.  If you’re going to use those filters film at way lower resolution so you don’t have to wait for hours while they process.


I’m aiming to go for a ride tomorrow to look at the fall colours after our first frost.  I’ll bring the Samsung along and see how well it photographs.  It’s promising 15 megapixel 360 images and high dynamic range landscapes, so I’m optimistic.  Photography is timeless and my preferred visual medium anyway, I find video too trapped by the continuity of time.  Maybe the Samsung will be a good photography tool.  Of course, I won’t be able to fire the thing remotely because I don’t have a Samsung phone…

from Blogger http://ift.tt/2yQBYyg
via IFTTT

Thanks to the Ontario Government ignoring the Canadian Charter of Rights and Freedoms and illegally forcing a contract on us, I had my 50th birthday off.  I had an entire year of saved up sick days stripped away, but hey, I got a day off for it.  So much for Charter rights.


I figured the Forks of the Credit would be silly over the long weekend, so I thought I’d head over there on the Friday afternoon.  Still lots of people about, but I got to have a couple of clean runs up and down the twisty bits where I wasn’t on the bumper of a duffer in a cage.  I’m not leaving rubber doing this, and I’m usually within 10km/hr of the limit, but cars through this twisty, technical road are a bit of a disaster.  It was nice to get a couple of runs without worrying about the processing capacity of the driver in front of me.


Photos are taken with a Ricoh Theta V on a custom built mount attached to the wing mirror.  Screen captured in the Ricoh software and modified in Adobe Lightroom:

The switchbacks at The Forks…

The little guy on the side of the road said, ‘woah!!!” so loud I could here him on the bike.  🙂

Always look where you want to go – sometimes that’s over your shoulder!

In the moment on one of the frew curves between me at the Niagara Escarpment.  If I lived in California I would be a regular canyon carver on the weekends.

Beautiful weather, minimal traffic and a frisky Tiger.  It was a good 50th birthday ride.

from Blogger http://bit.ly/30vVRIL
via IFTTT