Decentralizing 20th Century School IT Infrastructure

From the Prezi brainstorming digital sandbox: http://prezi.com/h7ms3hw7jx7-/mini-lab/

30:1 student to computer ratios?  It’s too expensive to have a 1:1 student to computer ratio?

This is a load of nonsense.  While the business world has moved on to individualized computing devices and cloud based software solutions, school boards still doggedly hang on to 20th Century thinking about centralized IT with massive, complex software images, difficult to manage intranetworks and remote maintenance of shared machines.

I’ve been on the ground, at class-level watching this fail again and again.  Equipment is vandalized and left inoperable for weeks at a time because no one local bears any responsibility for it.  Technicians are stretched thin between many schools, often not returning for weeks on end.  The already dismal student access to technology becomes even worse.

Labs that contain over-priced, years old hardware are kept under contracted repair long after they have given up every ounce of their residual value and are little more than landfill (and a heavy weight on network efficiency).  Those same labs contain the same, tedious software on the same, tedious hardware; a monotony of labs that offer nothing of the variety and opportunity available in the world beyond school.

The networks are overburdened with file sharing intranets that grind to a halt when many users begin to copy large files to network servers, or overfill limited on-site storage, causing the whole thing to simply stop.  So much focus is placed on intranet software and file sharing that access to the internet itself is through a tiny bit of bandwidth, making access to the largest collection of human knowledge ever assembled jerky, slow or utterly useless.

A modern business office uses task specific equipment to enable users continuous access to their data and their colleagues.  Phones are used when appropriate, but phones are never appropriate in school.  Tablets and ultralight laptops serve the mobile employee, allowing them to input information and communicate as though they are in the office when thousands of miles away.

Technology in education studiously ignores the needs of the student who must travel from home to school and class to class, carrying bags of massive, out of date textbooks.  Student to student communication is discouraged in most learning situations in favour of discipline and order.  If students do communicate in school (and I assure you, they do), they have to do it in underhanded, devious ways that violate whatever the latest technology-banishing rules dictate.

Information Technology in school is anything but.  Perhaps Lack of Information Technology would be a better title.

The mini-lab idea returns technical literacy to teachers from the star chamber of board based IT.  It places local people in charge of local equipment and drastically reduces the costs of educational technology while dramatically boosting the student to digital tool ratio.  Instead of the monotony of labs of out of date, inefficient, over-priced desktops, staff and students would gain access to an eclectic mix of digital tools and begin to develop meaningful digital fluency in both hardware familiarity and data management.  It’s a first, small step in a diaspora away from centralized board IT and toward differentiated technology access that truly serves our teacher’s and student’s needs in the evolving datasphere.

Biker Nerd Style

While everyone else is going for the Harley Davidson leather thing, I’m looking for a bit more nerd in my biker look.  I’m going with for an Imperial trooper vibe.I like the idea of white kit that gets used looking on the road.  Having a white jacket and helmet will also be cooler in hot sun.  

Star Wars Bike Culture!


The black and white theme can follow through to the bike too.  White helmet with black trim, white jacket with black trim.  White bike with black trim…

Monochrome but high visibility True North textile jacket.  It’s armored
(very Trooperish), and vented so it’ll be comfortable in the heat or lined
in the cool. Wish it came in white.
That’s the helmet I want, not the one I got, though the one I got was a full face white helmet with black trim too.  A modular helmet would be fantastic – the fighter pilot style is a bonus.

I’d originally thought I’d go cheap on the kit, but this is where you get yourself sorted out so that you’re comfortable and protected, at least as much as you can be on a bike.  To that end, I’m looking at all the details.

I’m all about the stream lined biking boot.  They protect the ankle, offer good ventilation and water proofing, and aren’t as crazy expensive as I thought they’d be.

I read another new rider in Cycle Canada who tried to go with construction boots but was frustrated by how clunky they made his footwork with gear changes.  I’m looking for boots that protect while giving me a good feel for the bike.

Getting kitted out for a bike is a cautious process.  It’s important to get what fits well and suits the kind of riding you’ll be doing.  A bit of consistency in the colour choices and style make for a bit more of a personal statement.  I might not line up with the Harley crowd, but I’ll look Imperial cool.

Pandemic Protocols: A COVID19 Ready Ontario Education System

COVID19 school early in the pandemic –
all that infrastructure not doing anything.
We can do better.

I’ve been reading the never ending speculation driven by an increasing panic on the part of educators as this school year approaches and this Ontario government seems incapable of planning for it.  When the panic rises too high people start making demands for things that we’ve never had, like a guaranteed safe school.  Teachers have been getting ill at schools since schools began, but this isn’t about that, it’s about managing COVID19 to the best of our scientific knowledge.  The point isn’t to aim at the impossible, it’s to put as many reasonable processes in place as possible to protect the people in the system.


This is about secondary (high) school, which might sound odd because no one is talking about high school COVID19 planning, so I thought I’d give it a shot since no one else appears to be.


From my admittedly layman’s point of view there are two sides to COVID19 management.  One is the social responsibility side, which is something people seem to be struggling with.  The other is monitoring and response.  For me, if the system were to spin up in September following these rules, I think we could get things working as well as possible under the circumstances.




INDIVIDUAL RESPONSIBILITY COVID19 MANAGEMENT

  • If your child had been in contact with anyone infected they should be withdrawn from school for two weeks in quarantine.  During this time they are expected to keep up with class work remotely unless they have severe symptoms, in which case a doctor’s note can release them from school work
  • Any child who is screened and discovered to have COVID19 is isolated at school and sent home at the earliest possible opportunity with minimal contact with others.  All schools have an isolated space reserved for this possibility
  • Testing will focus on students and staff who were in contact with any infected person
  • If an outbreak occurs (an outbreak is any traced transmission occurring at a school), the building is to quarantine/close for a period of 1 week during which time instruction will go online
  • Staff and students are to wear PPE when in close proximity to each other.  When social distancing is possible it is the preferred method of management.
  • Any staff or student who does not follow PPE protocols is to be removed from interaction and re-trained
  • All staff are trained in PPE expectations prior to the beginning of school
  • All students are to be trained in PPE usage prior to beginning instruction
  • Heightened cleaning regimes are to be followed in all classrooms, especially focusing on shared work spaces and technology.  All will be sanitized at the end of each period
  • Classes will be quad-mestered to reduce traffic, but secondary schools will be open all day on a regular schedule
  • Lunches are to take place in quad-mestered classes
  • Strict hall-pass protocols are to be in place to minimize wandering and out of class interaction
  • No student has locker access during pandemic protocols
  • Students will be required to wear masks while bussing, but normal bussing loads will occur
  • Students will be trained to minimize physical contact while bussing or transitioning between classes
  • Any student who does not comply with COVID19 safety training will be re-trained
  • Students or families unwilling to comply with pandemic safety requirements are to be withdrawn from physical schooling if re-training proves ineffective and offered remote learning options with credible expectations and work required or credits will not be granted
SYSTEM MONITORING & RESPONSE
  • All staff and students will be subject to random temperature tests
  • Any staff or student who show fever will be spot tested for COVID19
  • If COVID19 is found to be present, the staff or student with it are to be immediately isolated from the school population and sent home for a minimum of 2 weeks quarantine (remote learning is expected to continue unless symptoms are severe)
  • If COVID19 is found through tracing to be transmitting between people in a school then an outbreak shall be declared and the school shall be closed and quarantined for one week and all shared surfaces disinfected.  During a school quarantine class work is expected to continue remotely
  • Upon return all staff and students will be tested for fever and any found will be tested for COVID19
  • Random spot checks for COVID19 testing will continue
  • School boards are responsible for putting testing procedures in place at every location that ensure a minimum of 10% of the school population will be tested for COVID19 each term
  • Any classroom which is so over full that it causes repeated closures is to be reassessed (and really should never happened in the first place because learning in such terrible conditions should never have happened to begin with), and reorganized to be more medically and pedagogically sound
TEACHING PRACTICE MODIFICATION
  • Teachers are to provide all in-class material online
  • Where possible teachers are not to provide material on physical mediums (like paper) which can transmit the virus
  • All teachers are provided with technology that allows them to video any instruction which are then to be shared in online classrooms for any students unable to attend
  • Teachers are encouraged to use blended learning strategies that leverage remote learning systems even when face to face
  • Any shared workspaces or technology must be cleaned at the end of each class
  • Remote learning outcomes are to be assessed using the same criteria as in-class learning outcomes
There are countries in the world who have proven that with appropriate individual responsibility, access to cleaning and personal protective equipment and with regular monitoring and rapid response, COVID19 can be managed effectively.  If we’re going to argue that education is a vital service to society then we need to provide access to schooling to as many students as possible in as safe and transparently monitored an environment as possible.  This suggestion emphasizes the importance of social engineering in managing the virus individually while also making it clear what system responsibilities are in responding to an outbreak.  Instead of being paralyzed by this pandemic we should be applying these practical and effective solutions to managing it.

from Blogger https://ift.tt/3f3lc2w
via IFTTT

Triumph Tiger 955i Valve Clearance Check

I just measured the valve clearances on the Tiger.  They’re supposed to be checked every 20,000kms, I’ve put 27k on it since I’ve had it and who knows when they were done previously, so this was well past due.


Getting to the valves isn’t that problematic since I’ve gotten gas tank removals down to under 10 minutes while I try and trace down this frustrating inability to idle.  Here are the numbers:


Cylinder             Intake                     Exhaust
             .13mm & .10mm       .20mm & .23mm
      2         .13mm & .10mm       .20mm & .20mm
      3         .13mm & .10mm       .20mm & .23mm


Intakes are supposed to be 0.10-0.15mm, so they’re all within spec.  Exhausts are supposed to be gapped at  0.15 to 0.20mm, so a couple are on the cusp, though they’re a tight 0.23mm (you have to push the spacer in there like you mean it – the .2mm is still snug, just not as).


Turning the engine with the rear wheel in top gear was pretty easy – don’t grab the spokes, use the tire, you get more torque and it turns pretty easily.  As you turn the back wheel you get the cams pointing up, which is when you check clearances by sliding a feeler gauge under the cam and above the shim.


This Spurtar 32 blade feeler gauge from Amazon is a nicely made thing that offered me a full range of tapered ends that covered what I needed for checking valve clearances on this 955i Triumph Tiger. 


With the Tiger’s timing pretty much to spec valve clearance wise, it suggests that my intermittent stalling problem isn’t related to valve clearances.  Working on older bikes (and watching Car S.O.S.) has me well aware of what fails on older vehicles:  RUBBER!  Perished rubbers are Tim’s go-to in Car S.O.S. when it comes to restoring an old vehicle – this Tim is thinking that’s the issue with this 17 year old Tiger too.


I spent today putting things back together and double checking everything.  The vacuum system that feeds the idle control wasn’t plugged in 1-2-3 (I had it 1-3-2).  That’s something stupid enough that it might be the culprit.  At this point I don’t care what it is, I just want the bike to idle to the point where I can depend on it to not stall on me and leave me hanging.


If I get it all back together and find that I’m still stuck with an intermittent stall I’m going to start systemically replacing all the rubbers in it.  Doing a deep cleaning on the fuel injectors is an idea too.  I ran into an old guy at Canadian Tire who swore by Sea Foam for cleaning fuel systems, so I got a can.  I’ve got some in the Tiger tank for the rebuild which will hopefully be done by tomorrow.  In a perfect world the Tiger will be back to normal and I can go after the valves in the winter if I’m so inclined.  If it’s still stalling out on me, It’ll be a perished rubber hunt next.

from Blogger https://ift.tt/3hwzmuE
via IFTTT

Zen And The Art of Motorcycle Maintenance

I just finished this book.  It’s the first book I’ve finished digitally, I’m more of a paper and ink reader, but I thought I’d give this a go on my phablet.

The narrative is based on a man and his son doing a cross country trip on a motorcycle in the 1970s.  The story focuses on that quiet mind you experience as you make miles on two wheels.  While some people’s mind wander while riding, the narrator of this hefty tome starts with an examination of the basic mechanics of motorcycle maintenance but quickly wanders into a philosophical deconstruction of Greek philosophy and its effects on Western thinking.

If you’ve got a background in philosophy it’s fairly easy to follow, if you don’t you’re probably going to be wondering what the hell is going on. Persig likes to wander into complicated philosophical arguments with little warning.

The book is full of some real gems in terms of how we approach basic mechanics as well as life in general, but it can get pretty full of itself as well.

“Is it hard?’
Not if you have the right attitude. It’s having the right attitude that’s hard.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry into Values

To further complicate things the author is battling with his alter-ego as he recovers from electroshock therapy.  No, this isn’t an easy read, though it’s worth it if you can get through it.  I suspect this is a book many people have purchased but few have finished.  It sure looks smart on your bookshelf though.

Last year I read Shopclass as Soulcraft, which I’d recommend as a much more accessible read if you’re interested in getting philosophical through the lens of motorbiking.

Zen and the Art of Motorcycle Maintenance is a classic, and it has attained a kind of cult status in philosophy and motorcycle literature.  I’d recommend reading Crawford before you take a run at Persig.  Reading a review of Western philosophy wouldn’t hurt either.

Digital Collars

Originally published on Dusty World in April, 2014:

Wise Europeans have begun enacting legislation to protect people from the relentless onslaught of digital noise.  Coincidentally, I’ve recently had a number people lamenting the digital ties that bind them.  An article on how students can’t hold a conversation any more and a moody French art film on digital alienation followed:


LOST MEMORIES (French, English Subtitles) from Francois Ferracci on Vimeo.

This past weekend I had an elearning student send an email Friday afternoon and then shrilly demand, Monday morning, a response.  I haven’t heard back from them yet, but I did point out they were getting a detailed response to their email the next school day.  Ironically, that student has never logged in on a weekend and has frequently been weeks late handing in work, but perhaps we aren’t all held to the same standards of immediate access.  That people can yank on that digital leash and demand our attention regardless of their own competence is an irritation.

Another teacher mentioned how his smartphone is spoiling his hunting.  He used to get himself up into his hide and then settle down for some meditative and quiet hours communing with nature.  The last couple of times, deep in the woods, he’s been so busy keeping up with texts and social media that he forgot to commune with anything.  

The same teacher also mentioned that he has called students out for answering texts while in the middle of a working machine shop.  They often tell him that it’s their parents texting them.  He takes the phone and texts the parents saying that the student is busy and should be paying attention to what is happening (it is a machine shop).  It seems parental expectations have piggybacked on invasive digital practices.

One of the reasons I enjoy me motorbike so much is that I can’t be doing anything else while I’m on it, though apparently others have found a way.  The operation of the bike occupies my mind and body completely, it’s very therapeutic living completely in the moment like that.  That the information technology around us constantly pulls us out of the present is a problem we need to resolve.  Maybe the French aren’t out to lunch in trying to protect people from this expectation of being permanently leashed to our information stream.

From the frustration of sitting behind a car at a green light because the driver is distracted (thought they aren’t supposed to be), to helicopter parents being constantly in touch with students, perhaps it’s time for educators to start charting a more socially responsible approach to digital intrusion.

Note:  In case you think it ends there, here is another sad ode to social media, it’s becoming a meme!

 

Educational Bourgeoisie

A couple of months ago Alanna did a podcast with Albert Fong and myself on seminal books from our adolescence. I was all about Robert Heinlein’s Starship Troopers when I was a teen.  It felt somewhat biographical (I joined cadets because my friend did – like Juan, the main character in the novel), but in retrospect the philosophy in the novel is what really struck home because it emphasized a clarity of purpose that I’ve always found elusive.  At various points in the novel Heinlein goes to great lengths analyzing the failures of Twentieth Century thinking.  When Juan is in officer training he gets to the bottom of why the robotically armoured mobile infantry of the 23rd Century are willing to have themselves launched out of an orbiting spaceship and ‘dropped’ into a terrifying war zone:


“The root of our morale is: “Everybody works, everybody fights.” An M.I. doesn’t pull strings to get a soft, safe job; there aren’t any – all “soft, safe” jobs are filled by civilians; that goldbricking private climbs into his capsule certain that everybody, from general to private, is doing it with him. Light-years away and on a different day, or maybe an hour or so later—no matter. What does matter is that everybody drops.


…many armies in the past commissioned 10 per cent of their number, or even 15 per cent—and sometimes a preposterous 20 per cent! This sounds like a fairy tale but it was a fact, especially during the XXth century. What kind of an army has more “officers” than corporals? (And more non-coms than privates!)


An army organized to lose wars—if history means anything. An army that is mostly organization, red tape, and overhead, most of whose “soldiers” never fight.”
(Robert Heinlein, Starship Troopers)



I don’t know where we are in Ontario education when it comes to teachers who are teaching versus teachers who are getting paid as teachers but aren’t, but if you factor in all the support positions across the system I suspect that 20% is optimistic.  For every teacher earning a teacher’s salary that doesn’t teach, classroom teachers carry the burden.  When classroom average sizes increase (as they seem to every contract these days), you seldom see support positions disappear.  The education system is much more hierarchical than you might think.

At the school level we’ve already got a number of teachers working in non-instructional roles, but, like the 20th Century military that Heinlein criticizes, the fairy tale of a system with too much support and not enough boots on the ground continues at the board level where you find people earning teacher salaries doing administrative jobs ranging from shuffling health and safety paperwork to managing budgets.  In addition to making teacher pay without teaching, each of these support roles has to be supported by a multitude of larger classes in order to keep a 23 students to each ‘teacher’ average ratio.

The only place the education system ever seems to want to make cuts or create harsh, standardized testing to assess effectiveness is in the classroom.  Meanwhile, there is a hidden bureaucracy that remains untouched by cuts that hurt how children learn.


I’ve had a go at this before on Dusty World, but what kicked it off this time was a writing gig that came up recently.  I took a swing at it and was surprised to get a call back.  Why was I surprised?  These kinds of jobs tend to get passed around in that insular group of educational bourgeoisie who operate beyond the classroom.  Unsurprisingly, I appeared to be the only classroom teacher in the meeting.  I was then stunned when I was told that instead of actually creating subject specific material for this subject council we were going to create material that supported the specialty programming that everyone else in the group ran as their day job.  A guidance councillor who isn’t even qualified in this subject area then stated that we’d be writing support material for other subjects as well.  This got me quite angry.  I thought the purpose of subject councils was to support their subjects.  The long and the short of this very frustrating interaction is that I seem to have been removed from the program.


I’m still boiling about this as I look at my upcoming dangerously over-full, under equipped classes. Instead of helping me and thousands of other teachers protect our programs,  this subject council is busy feeding the educational bourgeoisie a second pay-cheque to support what they’re already doing in their day jobs at a board office.

I’m feeling very much a part of educational proletariat right now, but then all I do is actually teach. Heinlein was right, your morale takes a real kick in the head when you realize you’re doing the job others found their way out of as soon as they possibly could.

Were it the 23rd Century and humanity were united in an intergalactic war against insects intent on destroying us, I’d be proud to call myself a mobile infantryman doing a difficult job while knowing the organization I work with and the society it is serving recognizes and supports that difficult effort organizationally. Instead I work in Ontario public education.

from Blogger https://ift.tt/2WHLWQ3
via IFTTT

Snows And Crows and Adobe’s Lightroom

A crow playing in the wind on a snowy Saturday afternoon in February prompted me to get the Canon T6i out.  These were taken with the 55-250mm lens.  The original photos are so atmospheric that I started posterizing them in Photoshop and then gave Lightroom a try.  I’ve never used it before and was curious to see what it could do.  As a simple image editor it can do quick and effective image touch-ups.  LIghtroom did a nice job of making the images posterized in Photoshop pop…

The original image: f/8 1/500 sec, ISO 200 -1 Exposure, 250mm

 

Posterized (colour reduced) in Photoshop 

 

Details tweaked in Lightroom
Original image f/7.1, 1/400 sec. ISO 100 250mm brightened in curves in PS.

 

The crow colourized and layered with the background monochromed in black & white
After some tweaking in Lightroom.  The tree reflection caught in the window could have been washed out, but I liked how it came out with the vignetting.  I’m reading Neil Gaiman’s Norse Gods at the moment and this reminds me of Odin’s crow Huginn and Yggdrasil, the world tree.
Original photo: f/10, 1/800sec, ISO 200, -1 stop, 250mm

 

Posterized in Photoshop
Touched up in Lightroom…

 

from Blogger http://ift.tt/2od93jk
via IFTTT

Triumph 955i Stalling Issues Part 3, between a rock and a hard place

This started in June with intermittent stalling.  I’ve done all the obvious things like spark plugs, fuel and air filters, but the problem persisted intermittently, so I had another go at it in JulyThe Tiger has been my go-to ride for over four years now.  I’ve put over twenty-seven thousand kilometres on it, and up until this year it’s been as dependable as a sunrise.


This week I chased down some other possible electrical issues.  The ECU was covered in muck so I cleaned it up and sealed the plastic underbody around it so it won’t get mucky again any time soon.  I then found out how to test the ECU relay under the seat:


That’s the main how-to test Triumph 955i relays video, here are the two follow up videos: https://www.youtube.com/watch?v=TwkhX461GjM   https://www.youtube.com/watch?v=cDmh7FdpDDQ

Everything else is sorted on the bike, so I’m down to the valves, which I really should have done in the winter.  I’m now between a rock and a hard place since I’m not sure I’m hanging on to the Tiger and it takes weird, old 25mm over bucket shims that Japanese bikes haven’t used since the ’80s.  Modern bikes use much smaller under bucket shims.   My nearest dealer is far away and dropping off the bike there would be a real hassle, so I’m looking at getting the Triumph valve shim removal tool T3880012.  But you don’t need that if you’re willing to remove the cams, so now I’m elbow deep into pulling most of the top end out if I want to avoid getting a special tool for a bike I’m selling on. 


On the other hand, one of the reasons I got into bikes was to get back into mechanics, and any self respecting rider should know how to do valves, so I’m kinda keen to do the job since I haven’t done it yet.  I’m just shying away from sidelining my long distance motorbike in the middle of a too-short Canadian riding season while I wait for COVID crippled parts delivery on a 17 year old European bike.  The valves need doing anyway, but doing them might still not sort out the stalling issue, which would be very aggravating.

If I can move the Honda on I’d get the C14 Concours I’ve been eyeing and then the Tiger could take as much spa time as it needed.  I just had the Honda up for a few days in the four thousands, which is high for what it is, and only got an offer for a trade.  I’m going to put it up this week in the threes and see if it goes, then I can do some shuffling and take the weight of expectations off the old Tiger.

Motorcycle Valve Adjustment Research:


Good primer on valve clearance from Revzilla:  https://www.revzilla.com/common-tread/why-do-bikes-use-shim-under-bucket-valve-adjusters


Why higher revving bike engines have bikes have solid rather than hydraulic valve lifters that need adjusting (cars and Harleys rev less and so use hydraulic/self adjusting valve lifters:  https://www.quora.com/Why-do-motorcycles-require-valve-adjustments-when-automobiles-dont-require-them


https://www.bikesrepublic.com/featured/checking-bikes-valve-clearance-important/
Why checking your valve adjustment is important.


Triumph 955i specific valve clearance primer:  https://www.canyonchasers.net/2006/02/triumph-t955i-valve-adjustment-tips-tricks/


Local advice on how hard it is to find 25mm shims for the Triumph 955i engine: https://www.gtamotorcycle.com/xf/threads/help-looking-for-25mm-valve-shims.201738/


Some 955i engines are under bucket shims, the Tiger has over bucket shims (which is why the tool is needed if you don’t want to remove the cam):  https://www.triumphrat.net/threads/05-955i-valve-shims.6986/


Good advice on when to do your valve clearances (when you stop hearing the valves ‘rustle’): https://www.mikesxs.net/25mm-valve-shims-sizes-2-30-to-3-10-honda-yamaha-triumph.html

Shim sizing on 955i Triumphs (25mm over bucket shims are hard to find!):  https://www.triumphrat.net/threads/2000-955i-shim-diameter.230758/



BikeBandit has the tool (1-2 week wait, and a 25mm shim set for $335US/$455CAD because even though the US is making a mess of COVID19, their currency seems to be immune to their poor management.


At this point I’m stuck between over four hundred bucks in tools, parts and the opportunity to do my first valve adjustment and whatever Inglis Cycle gets back to me with costs wise – though that’ll also include having to get it over 140kms down there and get it back again on another day.  If they get back to me with a price north of $600 and a long delay in getting it done, I’ll be going after the tools to DIY it, though I don’t want to go crazy with a fancy set of 25mm shims when most modern bikes don’t seem to use these big over bucket shims any more.


I’d go with Fortnine, but for some reason they’re selling the identical shim kit to BikeBandit ($179US/$243CAD) for $278CAD. 


If I can move the Honda, I could get the C14 Concours and then have time to work on the Tiger without depending on it as my main long distance tool.  On the other hand, selling the Honda means I’ve just sold the only bike that’s working right at the moment.  The Tiger picked a bad time during the summer of COVID to tighten up on me, though I’m well past when the valves should have been checked so I only really have myself to blame.

from Blogger https://ift.tt/32z4G7W
via IFTTT

Triumph 955i Engine Stalling: next steps

The Tiger continues to stall out on me at the most inopportune times.  It starts from cold and idles high, but once warm the lower idle doesn’t seem to hold and the bike will stall, but not all the time, only when I really don’t want it to.  Riding back from Haliburton last weekend, the bike stalled at lights and when I got stuck in traffic on a 6 lane highway traffic jam during a rain storm, but when I pulled over later it idled normally.  This kind of intermittent failure is very hard to diagnose.


Looking up the issue online, intermittent stalling on a Triumph 955i engine seems to be an issue.  I’ve replaced the idle control system and tested the vacuum tubes again (no leaks), so I don’t think that’s the issue.  It might be a sensor that doesn’t return information consistently, but there are a lot of sensors feeding the computer that controls the fuel injection, so unless the bike is showing an error, I don’t want to start replacing them willy-nilly.


The bike does occasionally show errors on the Tuneboy Software that came with the bike:

July 1st it showed:
P0113 Intake air temperature sensor
P0230 fuel pump relay fault
P1231 fuel pump relay open

P0462 fuel level sensor input
P0463 fuel level sensor input
P0505 Idle control system malfunction
… but then they all seemed to go away and the bike was running well when I left for the long ride last weekend (over 800kms over 2 days), at least until I was riding home at the end of it when the intermittent stalling returned.  It was showing this again this week:








I’m not sure that the air temperature sensor would be enough to stall out the engine, but this at least gives me a couple of things to look into: that air temp sensor and the fuel level sensor (though again, that shouldn’t affect the idle).


Some advice people have given (on the internet, so take this advice with a healthy dose of skepticism) is that out of balance throttle bodies might cause the issue, so I got a Carbmate vacuum balancer from Fortnine who have their shit back together as far as filling orders go and got it to me in less than 2 days (use UPS, not Canada Post, who are still not working properly).


I balanced the throttle bodies with it, but the stalling persists.  I’m now looking at the mapping for the bike in addition to keeping an eye on errors that might pop up.  This video uses Easy Tune, which I haven’t monkeyed with, but gives the impression that early Triumph electronic fuel injection was a bit of a mess and many dealers don’t know how to resolve it:




That’s a bit worrying because if I’m still stumped I was going to take the Tiger down to Inglis Cycle and have them resolve this with some factory testing, but if I’m going to pay dealer rates and get the bike back still stalling, that’s not cool.


TuneECU was a free Windows software download (it’s still available but not supported any more), but now it’s an Android app you have to pay for (though fifteen bucks isn’t unreasonable if it gives you control over your bike’s ECU).  Unfortunately the Tuneboy cable and software I have isn’t directly compatible with it without some dark Windows driver mojo (newer windows auto-install a driver that doesn’t work with the old chipset on the Tuneboy cable).  Triumph uses the same FTDi FT232RL VAG-COM OBDII/USB cable as VW does, but I think I’m going to try and resolve any mapping issues with the Tuneboy since it came with the bike and works.


I think I’m going to go back and look at the fuel pump relay and the wiring for it as an intermittent fault there would starve the engine and cause stalling.  Less likely are the air temperature sensor and fuel level sensor, which have been a bit whacky with the fuel gauge going from full to empty and back to full again, but I don’t see how that could cause a stall.  If there’s gas in the tank, the engine will use it.


My order of operations is:
– fuel pump relay (which might have gotten wet at a recent cleaning, so it’s on my mind)
– fuel level sensor
– air temperature sensor


If they aren’t crazy expensive, I might just get all 3 new rather than paying shipping x3, which would probably cost more than the parts.

NOTES:

https://www.triumphrat.net/threads/955i-engine-stalls-need-help.16567/

“throttle slides were out of balance”

https://fortnine.ca/en/tecmate-carbmate-synchronizer-ts-110
fuel injector/carb syncronizer

https://en.vindecoder.pl/L4PLUMC0662000046
vin looker upper if you’re wanting to confirm year and make

https://tuneecu.net/TuneECU_En/install1.html
‘free’ ECU tuning options for Triumphs – early FI Triumphs seem to have a number of issues

https://www.youtube.com/watch?v=QvHqNeClz2U
video guide to TuneECU (I can’t stand online how-to videos, I prefer text. Waiting for 30 second intros each time drives me around the bend, but maybe you like that

https://www.ftdichip.com/Drivers/D2XX.htm
chip drivers for FTDI cables

https://www.r3owners.net/threads/tuneecu-with-tuneboy-cable.7856/
Using a Tuneboy cable with TuneECU

https://www.triumphrat.net/threads/cant-get-tune-ecu-app-to-connect-ugh.962476/
connections issue with TuneECU (I found Tuneboy pretty straight forward, but it’s a more expensive option that I’m using only because it came with the bike)

https://www.bikebandit.com/oem-parts/2003-triumph-tiger-955i/o/m121594#sch565841
Parts diagram for a 2003 Triumph Tiger 955i focusing on the EFI relay (it’s under the seat) Triumph RELAY, EFI Part # T2502109

from Blogger https://ift.tt/399z0qS
via IFTTT