Posted on

Riding the Rocky Mountains

I drove the Canadian Rockies this past summer.  Riding from Ghost Lake in Alberta to Chilliwack in British Columbia would be one hell of a few days.  We did it in a crazy day and a half going the most direct route we could with one missed turn having us drive the wrong way to Boston Flats to get back on the Trans Canada.  Doing the Rockies like that it was pretty exhausting, even in a car.


On a bike it’d be dangerous to try and pull that off, especially as none of the roads are straight and you’re fighting altitude too.  It would be a shame to rush through it anyway, so taking your time is the way to go.  When I eventually ride the southern Canadian Rockies it’ll be a multi-day trip that makes use of every road I can find.
  




Day One:  Cochrane, AB to Radium Hot Springs, BC.  323kms via 40/742.  Lunch in Banff.  That’s just over five hours of riding at a sixty kilometre per hour average.  With multiple stops, it’d be a full day of riding twisty roads before hanging it up in Radium Hot Springs for dinner.









Day Two: Radium Hot Springs to Revelstoke, BC. 252kms via 95 and TransCanada.  This might seem like a short day, but it’s high altitude passes over top of the world stuff.  We staggered into Revelstoke around dinner time and wanted to stop, but had to push on.




Day Three:  Revelstoke to Vernon along Upper Arrow Lake.  300kms via 23 and 6.  We didn’t go this way last time and bombed down the TransCanada behind infinite numbers of campers and eighteen wheelers who were wheezing up and down the inclines.  This route is at least as twisty but should offer less heavy traffic than on the more direct route.  Kamloops was a pretty rough spot, so I wouldn’t miss it the second time through.



Day Four:  Vernon to Hope via Boston Flats and Hell’s Gate.  After a couple of light days, the last day going West is a kicker.  Just over 400kms of very twisty mountain roads.  Google maps says it’s a five hour effort, but with traffic, twists and roads that’ll leave your mouth hanging open, that’s an optimistic ETA.  This would be an all day ride along some unforgettable roads.  I ran into a new rider at Hell’s Gate who had ridden up from Vancouver.  He was grinning ear to ear.





From Hope you’re ideally poised to hit the west coast, but this isn’t about that.  If you still haven’t had enough of your Canadian Rocky Mountain High, a trip back skirting the US border offers you a whole new set of twists, turns and stunning scenery.  I’d be hard pressed not to want to head toward Valhalla…



You could do a lot worse than giving yourself a couple of weeks (or months, or the rest of your life) wandering the Canadian Rockies.  This trip doesn’t even touch Jasper or Whistler.  There are also a number of roads that don’t go anywhere.  Chasing down those dead ends would be an obsession of mine if I lived out there.


Here are some of those roads we saw this summer… 









…and these are all ‘main’ roads!


Like most Canadian Roads, they suffer huge swings in temperature.  The ideal thing to tackle them on would be a road focused adventure bike.  The extra suspension travel would help soak up the inevitable imperfections while allowing you to still enjoy the twists and turns.  They also happen to be the ideal ride for a big guy like me.

KTM focuses on fast ADV bikes, but you’d also be spoiled for choice if you looked at Triumph’s big Explorer, or BMW’s bonkers XR sports ADV.  

Yamaha’s Super Ten is a solid, fast choice, as are the other larger capacity Japanese bikes (though they all seem to object to defining the category).



from Blogger https://ift.tt/2xiE0XQ
via IFTTT

Posted on

Wanderlust: A Travel Motorcycle Production Company

I’m at it again.  Wanderlust, but with my trusty production crew this time.

North and West and then back again with the least amount of same roads:


I must have some kind of strange OCD, but I really enjoyed putting this together:

With scheduled production crew meetups and travelling together from Prince Rupert to Vancouver Island and back to Vancouver, it turns into a 41 day ride schedule with a 36 day production schedule.  The production team (Max & Alanna) have 8 flights spread over the 36 days they are on the road.

This would be an opportunity to collect video and develop a cross Canada story from a lot of different angles.  The production team would collect stock footage of the various regions we’re in and save footage and data off the bike at meetups.  They’ll then backup all data including footage and keep it safe.  I also hope they’d maybe develop their own stories in the process.

The goal of the production will to use the latest in digital tools to record the trip, eventually producing a variety of media out of it.  My goal would be a written story of a long distance, cross Canada, endurance motorcycle ride with photography to support a book.  I’d also then look to turn the ride into an episodic travel TV show.

Tools We’d be using


A 360° camera for experiential video.

I used a Ricoh Theta 360° camera a few weeks ago and was impressed with the results.  I’m not sure how we’d integrate this video into a media piece, but it would open the door to exploring virtual reality, which feels like the next big thing.  The lack of a single point of view makes for challenging post production, as does the huge amount of data it collects.  ThetaS: $450  The 360fly could be another choice.

A Contour action camera on the bike.

I used this last fall and found its small profile ideal for collecting video from a motorcycle.  The upper scale model allows memory and battery swap-outs, making it ideal for shooting on long days.  I’d have one wired in to the bike so it could keep shooting for footage we could use in high speed video.  When things get really rough up north, this will keep collecting footage when others fail.  Conour+2: $430
The Olympus Tough TG-Tracker might be an interesting alternative.

 


I’m partial to Olympus Cameras.  In addition to the video camera on the bike, I’d also carry an Olympus OM-D E-M1 DSLR for photography.  It’s weatherproof and tough, takes a wide variety of lenses (I’d carry a tele-zoom, 2x teleconverter and super wide angle with me).

Backup batteries and memory cards mean it’ll keep going all day.  

Olympus OM-D E-M1: body & lenses $2800


The production team would carry a pro-quality DSLR camera for shooting highest quality video.  The Canon EOS 70D is generally considered the top DSLR for video.  With proper video LED lighting, tripod and on camera and interview mics this kit would collect top quality video and sound.  Multiple battery and memory cards mean it can keep shooting on long days.

Multiple microphones (on camera and clip on interview), a teleconverter and a wide angle lens along with the 18-135mm lens would cover pretty much every eventuality.

Canon EOS 70D with accessories:  $1700


Another leading edge tool for this trip would be an aerial drone to take fantastic establishing shots.  The DJI Phantom 4 is a Canadian made aerial camera platform that produces astonishing video footage.  Its 28 minute flight time mean it could be used on multiple flights and recharged in the camera truck between flights.
Phantom4 with spare batteries & case: $2300

 


$30k seems like a good price for generating a wide variety of footage that could eventually be made into multiple cross country stories of epic proportions!

Now to find a producer and some corporate support.  My logo-ed dream team would be:



Posted on

ECOO 2014

ECOO 2014 approaches this week.  Once again I get to step away from the classroom for a couple of days and see the forest for the trees.  Instead of day to day/trying to make things work, I get a couple of days of strategic space to consider how things might be.

The ECOO conference is all about possibilities for me.  I know a lot of people go there to learn how technology works, and that’s great, but for me it has always been about possibilities.

In school we’re all in the trenches trying to make things work.  For tech-savvy teachers this can be a very frustrating experience.  We’re not only battling the complications of getting complex information technology to function in the rough and tumble world of the classroom, we’re also battling the negativity of colleagues who aren’t buying in to the possibilities offered by this technology.

ECOO is a chance to get away from all that static and consider possibilities in a positive light.  The trick for me has always been not to get mired down in how-to sessions.  I like the big thinking/strategic talks.  The keynotes usually do this well, but it isn’t always possible to find that kind of opportunity in the breakout sessions because a big part of ECOO is assisting new edtech aficionados into the fold.  When I can’t find an edtech-philosophy or future-tech session I’m just as happy to bump into someone and have an unscripted chat.  You won’t find a greater edtech braintrust anywhere than you will at ECOO.

What will I get out of ECOO this week?  Inspiration, I hope, and some idea of what’s coming, so I can be ready for it before it gets here.


Posted on

Doubt

I did a 360km-ish kilometre ride on Saturday.  All back roads and as twisty as I can find in the farm-desert we live in.  I was gone shortly after 8am and had a coffee at Higher Ground before ripping up and down the Forks of the Credit.  I was then up past Orangeville to Hockley Valley Road, back through Mono Hills and up to River Road into Terra Nova before coming back down to Horning’s Mills and north to Noisy River Road into Creemore.  All in all I crossed the escarpment half a dozen times on my way north.


By now it was well past noon and into the high thirties with humidity.  After a great lunch at The Old Mill House Pub in Creemore I was out to Cashtown Corners to fill up and then past Glen Huron and over the escarpment one more time before heading north to Thornbury Cidery and the cooler shores of Georgian Bay.

Nothing Cools you down like the shore of a great lake on a hot, summer day.

From Creemore on I was soaking wet and sweating freely, monkey butt (red and sore on my backside from wet, aggravated skin) was soon to follow.  It wasn’t so bad by the lake, but inland it was sweltering.  I was standing frequently to try and get wind under me, but by this point my big ride was just uncomfortable.  The Macna vented pants did ok on my legs, but where I needed it the most they were just trapping heat and leaving me dripping.


I bombed south down Beaver Valley, stopping once at an overlook to finish the Gatorade I had and then on to Flesherton for a stop at Highland Grounds before dodging and weaving south on back roads towards Elora and air conditioned nirvana.

Before I left that morning I learned that Wolfe and Robyn, the founders of Lobo Loco long distance motorcycle rallies, had already started the monumentally difficult Bun Burner Gold, the seemingly impossible fifteen hundred miles (2400kms!!!) in twenty-four hours – yes, that’s a 100km/hr average for a whole turn of the earth.  You’d need to be making time every hour so you’d have time to get gas, eat, drink and toilet; it’s madness!

By the time I’d seen what these two superheroes were going to attempt that morning they had already done more miles than I was going to do all day (monkey butt and all), and they still had the better part of two thousand kilometres to go… in a day!


Part of this is making sure you’ve got the right gear for the job.  I’m going to address that in another post, but the other side of this is do I think I can actually pull something like that off.  I’m months away from turning fifty and I’m starting to get a sense of what getting older is going to feel like.  Doubt is what starts you thinking that you have to act your age.


The two doing that epic bun burner are fifteen plus years younger than I am and much more experienced riders.  My starting to ride late grates on my nerves.  Despite numerous opportunities, events beyond my control conspired to prevent me from finding my way back to a hereditary hobby.  Those lost years still haunt me.

No point in moping about it.  I’ve gotta grab the opportunities as I find them and not let doubt weaken my resolve.  If I want to get an Iron Butt done then I need to get it done.  You don’t get shit done by moaning about it.  But first I’ve got to get my seat and kit sorted.  No point in trying to do a job without the right tools.



from Blogger https://ift.tt/2QQiqD4
via IFTTT

Posted on

A Summer Jaunt into the Adirondacks

I’m getting a bit stir crazy riding to the same places over and over.  Reading about Wolfe’s run at the Iron Butt Rally this year makes me want to raise my own long distance game with an eye to eventually taking a run at that event.  Who wouldn’t want to pass out in a graveyard for half an hour before hitting the never ending road again?


The Water is Life rally helps provide some alternatives, but what I really want to do is an overnight trip to roads both interesting and new.  The Adirondacks are the nearest thing I have to mountain roads anywhere near me beyond Southern Ontario’s flat, industrial farming desert.


Operating out of the Hotel Crittenden, I’d be able to leave luggage behind and travel light on the two loop days designed to explore the twisting roads of the Adirondack Mountains.  Hotel prices tend to spike on peak times like weekends, so a mid-week trip should keep costs minimal.  It’s a couple of hundred miles south and east, over the US border into New York State and south through the old mountains of eastern North America to Coudersport on the Allegheny River.



Day 1:  Ride to Coudersport:  352kms
https://goo.gl/maps/pGs8DgPVezkTCF6U7


Hotel Crittenden:  https://hotelcrittenden.com/


Interesting Adirondacks roads:  http://www.motorcycleroads.com/Routes/New-York_108.html






Day 2:  Snow Shoe Haneyville Loop:  352kms
https://goo.gl/maps/ixVjPmw6jBJzcHGg8





Day 3:  Hollerback Loop:  384kms
https://goo.gl/maps/13odCYiY5RNSJHAE8









Day 4:  Ride Home:  409kms
https://goo.gl/maps/RbVZd5wx9HQWbqoi7

1497kms (930 miles) in 4 days / 3 nights.
Monday – Thursday (cheapest hotel room rates)
Hotel nights:  Monday, Tuesday, Wednesday
August 19-22:  USD $238.50 / CAD $313 Single King Room /3 nights

Our King suite is large, nearly 450 square feet. Each of our rooms is uniquely decorated and appointed with a classic theme. Relax on our premium quality king sized mattress and enjoy the historic surroundings. All rooms include a flat screen television, Coffee maker, and free WI-FI. The Bathroom features a Stand up shower with complimentary toiletries and a hair dryer.

Amenities on site (restaurant, bar) and a great downtown location near many other eating options means no need to ride at the end of a long day exploring twisty mountain roads.








The same area is great for autumn colours: 
https://tkmotorcyclediaries.blogspot.com/2018/09/pennsylvanian-autumn-colours.html

















from Blogger https://ift.tt/2GcYk25
via IFTTT

Posted on

9 Days in March: Exploring The Ozarks

Next week is on or about freezing up here in the never ending winter.  Friday is looking like it might be a possibility with a current suggestion of seven degrees Celsius.  I can handle seven degrees.

 In a more perfect world I’d be heading out of work today, jumping in the van and driving south to where things get yellow and orange on the map.

 If I was on the road by 3:30pm, I think I could manage the eleven hour drive to St Louis by just past 2am.  I’d park up the van and have a sleep and aim for a morning departure from St Louis aiming South West into the Ozarks.



Seven days of following the twisting roads of the Ozarks would make for a brilliant March Break.  I’d aim to get back up to the hotel in St. Louis the next Saturday and spend one more night there before making the drive back into the frozen north on the Sunday before we’re back at work again.  A day of driving, 7 days on the bike, a day driving back.

Yes, please!



Them’s some nice March temperatures, especially compared to ours…



Ozarks Resources:
http://ozarkrides.com/
http://www.motorcycleroads.com/Routes/Arkansas_79.html
http://motorcycleozarks.com/
https://www.facebook.com/RideTheOzarks/
http://www.cruisetheozarks.com/
https://www.arkansas.com/outdoors/motorcycling/hot-spots/

from Blogger http://ift.tt/2Fq8JsR
via IFTTT

Posted on

ECOO15 1: Making Frustrations

Back from ECOO15 and, as usually, my head is full.  After a rough year of politics around Ontario Education it’s nice to attend a conference made by teachers for teachers about… teaching!  Not a politician in sight, though attendance was wounded at this volunteer run conference by them.

ECOO may have been the site
of the first ever 3d photobomb!

I spent Wednesday with my robotics teacher showing people how to make 3d models using a Structure Sensor – a 3d laser scanner that is cheaper than the ipad it connects to.  It’s one of those game changing bits of engineering that suddenly opens up the complex world of 3d modelling to pretty much anyone.

We put the scanner into hundreds of hands and Katy was on there to show them how our 3d printers took those models and made them tangible.  For many who have heard of the maker movement, 3d modelling and printing but had never seen it in action, it was a seminal moment.  I’m hoping it also means people start considering how we can move toward a maker mentality, because it’s about as far removed from what we do in formal education as you can get.


Buddha Tim by tking on Sketchfab – @banana29‘s first 3d model, nicely done!


The next day, the opening keynote by Silvia Martinez was an overview of makerspaces and how they create a genuine learning environment.  Unfortunately, and like so many other educational books capitalizing on a trend, the keynote sold the concept of Making based on the fantastic contraptions shown at world class Maker Faires.  This is akin to saying everyone should play soccer like this, and then showing them the World Cup.

Education teaches students to expect success if they do what
they’re told.  Engineering demands mastery, creativity and
resilience; reality is a demanding teacher.

As I said in the conference, making involves frustration and failure.  More often than not it results in a prototype that doesn’t work.  I find that the grade nine students I am introducing this process to are greatly aggravated by the inflexible demands of reality.  They are quick to blame and even quicker to give up.  The most common comment is, “just tell me how to do it.”  The sub-text is, ‘I’ve learned to do what I’m told in order to show I’m learning.  Why aren’t you doing that?’

Students are used to the education system jigging things to ensure success.  The process of invention doesn’t do this and reality has no interest in modifying how it works so that students can feel good about their effort.  I don’t teach ‘I tried real hard’ or ‘guaranteed success’.  What I do teach is how computers and electronics work, and I expect students to develop skills sufficient to be able to work this these inflexible devices.  Once the mastery is managed, play can begin.  Shakespeare wasn’t writing plays while he was still learning to write.

This was posted by Bre Pettis way back in 2009.
This kind of radical engagement isn’t the managed
and directed engagement teachers are looking for.

If you want to build with electronics and digital technology (which are what are empowering much of the maker movement), you need to have something more than boundless enthusiasm.  Using digital technology isn’t effortless despite the marketing.  There is mastery learning required before you are cranking out 3d prints of gears and building your own robot out of garbage.  Many of the people creating the things you see at a maker faire are trained engineers.  I’ll bet that the kids shown at these Maker Faires are relying on some engineering expertise at home as well.  It’s nice to see their creativity, but it isn’t the only thing, or even the main thing, that is enabling these builds.  It’s like watching the child of a scientist presenting a surprisingly fantastic science fair project.

My concern is that Ontario Education will rush into this exciting and trendy fad, buying stacks of Arduinos, Raspberry Pis and 3d printers which will then gather dust when teachers realize that this equipment isn’t Lego, it doesn’t build itself with enthusiasm.  Your code has to be flawless and your wiring exact for even basic things to happen, and even when you’ve done everything right it might not work anyway because the LED you used happens to be defective.  You can’t simply lower expectations and then see results.  These are complex systems being created.

I struggle each year to get high school students to develop resiliency and master skills in electronics and digital technology so I would ABSOLUTELY LOVE to see the maker movement and its attendant philosophies infect Ontario’s classrooms.  The kids are more than capable of developing this resiliency and expertise, but I suspect that the vast majority of educators (many of which I help to plug in their desktops each day) aren’t.

The maker movement pushes back against vapid consumerism.  I’m a big fan of intimately knowing the machines I use.  The motorcycle I ride I restored after finding it in a field, the computers I use I build from scratch, but it took me years to build my mechanical and digital skills to this level.  Most people aren’t that patient, or curious.  Most people want immediate satisfaction, which is why they drive their cookie cutter SUVs to shopping malls.

Most teachers are no different.  If it isn’t their curriculum, it’s of no interest. Trying to push maker tools into that kind of classroom is a disaster waiting to happen.  If you’ve never used Linux, let alone installed an OS onto an SD card, what makes you think you will make magical use of Raspberry Pis?



Posted on

Sabbatical Rides: Following Grandad On The British Expeditionary Force

I’ve previously written about and done a fair bit of digging into my Grandad Bill Morris’s World War 2 service in the RAF.  His time spent in France with the British Expeditionary Force before the Nazis invaded in 1940 highlights a forgotten piece of history.  Weeks after Dunkirk had pulled most of the troops out, Bill’s RAF squadron was still flying a fighting retreat against overwhelming odds.

 By comparing various historical documents I’ve managed to cobble together the strange course Bill’s squadron took during this desperate retreat.  Spending a year following in his footsteps would be a pretty magical experience and a brilliant way to spend a sabbatical away from work.

 Conveniently, from a sabbatical time-off scheduling point of view, Bill landed in France in September, 1939 in Octeville and proceeded north to set up an air base in Norrent-Fontes near the Belgian border.  They then wintered in Rouvres and as battle commenced were fighting out of Reims before retreating south and then west around Paris, quickly setting up  aerodromes for his squadron’s Hurricanes and then breaking them down and moving on while under constant fire.  They were supposed to get out on the Lancastria in Saint-Nazaire (another forgotten piece of World War 2 history), but Bill was late getting there (operating heavy equipment means you’re not at the front of the line).  He saw the ship get dive bombed and sunk – the biggest maritime disaster in British history, with most of his squadron on it.  He spent the next two weeks working his way up the coast before getting out on a small fishing vessel and back to the UK at the end of June, just in time to get seconded to another unit for the Battle of Britain.  Being able to trace Bill’s steps would be a powerful journey.



Bill was an RAF military policeman who worked in base security, but his handiest skill was his ability to drive anything from a motorbike to a fuel bowser.  It’d be cool to use the period technology Bill used to retrace his steps through France.

This sabbatical ride would have to happen between July of one year and the August of the next.  Following Bill’s time in France I would be landing in Octeville from the UK in September, hopefully on a period bike.  My preferred ride would be a 1939 Triumph Speed Twin, though an RAF standard Norton 16H would be equally cool.


If I couldn’t find a period bike I’d try and source a modern descendent of the Triumph or Norton.  Triumph is actually coming out with a new Speed Twin shortly, so that’s an option.  Meanwhile, Norton is coming out with the Atlas, which would be a modern take on the do everything 16H.


I’d arrange to stay in the places Bill did at the same times he did over the winter and spring.  With many days at various locations in rural France, I’d have a chance to find the old aerodromes and make drone aerial imagery of each location, hopefully finding evidence of the his war history hidden in the landscape.  I wonder if I’d be able to see evidence of the Lancastria’s resting place from the air.  With time to get a feel for the place, I’d write and record the experience as I moved slowly at first and then with greater urgency in the spring around Paris, through Ruaudin, Nantes and Saint-Nazaire before ending the trip in Brest at the end of June when Bill left, almost three weeks after Dunkirk.

The research so far on Bill’s World War 2 service in France, the Battle of Britain in the UK and then into Africa!

Living in France for most of a year would offer a cornucopia of travel writing opportunities and the historical narrative I’m following would let me experience a lot of local colour in order to research a fictional novel I’ve been thinking about writing based on Bill’s World War 2 experience.


To get ready for this I’d get Bill’s full service record and research the whens and wheres of his experience on the continent during the Phoney War and through the Fall of France.  


When all was said and done I’d pack up the bike and ship it back home to Canada where it would always be a reminder of the year I walked in my Grandad’s footsteps.

Research Links to date:

Bill’s service record research:  https://docs.google.com/spreadsheets/d/1PiN1LBIt0sBOa3uYNF6R7WI-5TP-jgOSPu9lrJlzVuU/edit?usp=sharing
Map of Bill’s Squadron movements in France: https://goo.gl/maps/hRr3aRAUFTM2
RAF squadron research: https://docs.google.com/document/d/1-XGAS0ajnEVGmJ_8-aATYDJrPWUHoWri8AILsNd1pN8/edit?usp=sharing





from Blogger https://ift.tt/2QHLE6o
via IFTTT

Posted on

Sanding Concours

One small heater does the job now that I have
garage door insulation installed.

A good couple of hours were spent in the garage today getting the scratches and dents out of various Concours panels.  The previous owner had used some kind of plastic filler to put back together the lower right fairing after it had been dropped.  With some hand sanding today I’ve gotten it close enough to prime and prep for a round of painting.  If it isn’t perfect it’ll be much closer than it was.

I’m trying to find the Tremclad metallic red similar to the blue I used on the Ninja, but I’m having trouble finding it.  Home Depot seems to have dried up on it.  That paint with the gloss clear coat comes very close to looking like it came from a body shop.

I’ll keep looking.

The small heater did a good job of heating up the room to 18°C (it was -8°C outside).  The garage door blanket is doing its job nicely.

Got the rear fairing piece around the seat off and prepped for painting.

Everything sanded and cleaned, ready for some primer.

Connie stripped down to the tank.